2005-2008 RAV4 · Service Manual DRIVE LINE

REMOVAL

Removal / installation · Vehicles built Jan 2007 – Jul 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
  1. for 1AZ-FE:
    Remove the engine with transaxle (Click here).

  1. for 2AZ-FE:
    Remove the engine with transaxle (Click here).

  1. for 2AD-FTV:
    Remove the engine with transaxle (Click here).

  1. for 2AD-FHV:
    Remove the engine with transaxle (Click here).


3. REMOVE REAR ENGINE MOUNTING BRACKET
  1. for U140F:
    Remove the engine mounting bracket (Click here).

  1. for E352F:
    Remove the engine mounting bracket (Click here).

  1. for EA64F:
    Remove the engine mounting bracket (Click here).


4. REMOVE TRANSFER ASSEMBLY

C126622
  1. Remove the 6 nuts, 2 bolts and transfer from the transaxle.

← REMOVAL (Nov 2005 – Dec 2006)REMOVAL (from Aug 2007) →