2005-2008 RAV4 · Service Manual DRIVE LINE

REMOVAL

Removal / installation · Vehicles built from Aug 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. DRAIN TRANSFER OIL
  1. Remove the drain plug and gasket, and drain the oil.

  1. Install a new gasket and the drain plug.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }


3. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
  1. for 1AZ-FE:
    Remove the engine assembly with transaxle (Click here).

  1. for 2AZ-FE:
    Remove the engine assembly with transaxle (Click here).

  1. for 2AD-FTV:
    Remove the engine assembly with transaxle (Click here).

  1. for 2AD-FHV:
    Remove the engine assembly with transaxle (Click here).

  1. for 2GR-FE:
    Remove the engine assembly with transaxle (Click here).


4. REMOVE REAR ENGINE MOUNTING BRACKET
  1. for U140F:
    Remove the rear engine mounting bracket (Click here).

  1. for E352F/E359F:
    Remove the rear engine mounting bracket (Click here).

  1. for EA64F:
    Remove the rear engine mounting bracket (Click here).

  1. for U151F:
    Remove the rear engine mounting bracket (Click here).


5. REMOVE TRANSFER ASSEMBLY

C126622
  1. Remove the 6 nuts, 2 bolts and transfer from the transaxle.

← REMOVAL (Jan 2007 – Jul 2007)DISASSEMBLY (from Nov 2005) →