DIAGNOSTIC TROUBLE CODE CHART
Diagnostic trouble codes · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008
| DTC No. |
Detection Item |
Trouble Area |
See page |
| C1241/94 |
Low Power Supply Voltage |
-Battery -Generator -ECU-IG1 -Wire harness -4WD control ECU |
Click here
|
| C1280/82 |
Engine Circuit Malfunction |
-Throttle position sensor -Throttle position sensor wire harness and connector -CAN communication system |
Click here
|
| C1296/96 |
ABS Malfunction |
-CAN communication system -Wire harness -4WD control ECU -Skid control ECU -Speed sensor -Yaw rate sensor |
Click here
|
| C1297/97 |
Steering Angle Sensor |
-Steering angle sensor -CAN communication system -4WD control ECU -Wire harness |
Click here
|
| C1298/98 |
Linear Solenoid Circuit |
-Wire harness -Electromagnetic coupling -4WD control ECU |
Click here
|
| C1299/99 |
Cancellation of 4WD Control |
-Tire size -4WD control ECU -Electromagnetic coupling |
Click here
|
| U0073/86 |
Control Module Communication Bus OFF |
-Wire harness (CANH, CANL circuit) -4WD control ECU |
Click here
|
| U0100/85 |
Lost Communication with ECM / PCM "A" |
-Wire harness (CANH, CANL circuit) -4WD control ECU -ECM |
Click here
|
| U0126/84 |
Lost Communication with Steering Angle Sensor Module |
-Wire harness (CANH, CANL circuit) -4WD control ECU -Steering angle sensor |
Click here
|
| U0129/83 |
Lost Communication with Brake System Control Module |
-Wire harness (CANH, CANL circuit) -4WD control ECU -Skid control ECU |
Click here
|