Refer to "4WD Indicator Light Remains On" (Click here).
WIRING DIAGRAM
Refer to "4WD Indicator Light Remains On" (Click here).
INSPECTION PROCEDURE
HINT:
Check the condition of each related circuit connector before troubleshooting (Click here).
1. CHECK CAN COMMUNICATION SYSTEM
Check if the CAN communication system DTC is output.
Result:
Result
Proceed to
DTC is not output
A
DTC is output
B
HINT:
When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.
B
REPAIR CAN COMMUNICATION SYSTEM
A
2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (4WD INDICATOR LIGHT)
Using the intelligent tester's Active Test, generate a control command, and then check that the 4WD indicator light operates.