Cruise Control System
Symptom
| Suspected Area
| See page
|
SET not occurring or CANCEL occurring (DTC is normal)
| Input signal circuit
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
Stop light switch circuit
|
Click here
|
Park/neutral position switch (for Automatic Transaxle)
|
Click here
|
Clutch switch circuit (for Manual Transaxle)
|
Click here
|
ECM
| -
|
SET not occurring or CANCEL occurring (DTC is not output)
| Cruise control switch circuit
|
Click here
|
ECM
| -
|
Actual vehicle speed deviates above or below the set speed
| Vehicle speed sensor circuit
|
Click here
|
ECM
| -
|
Gear shifting occurs frequently between 3rd and O/D when driving on
| Vehicle speed sensor circuit
|
Click here
|
ECM
| -
|
Cruise control not canceled, even when brake pedal is depressed
| Stop light switch circuit
|
Click here
|
ECM
| -
|
Cruise control not canceled, even when transaxle is shifted to N (for Automatic Transaxle)
| Park/neutral position switch
|
Click here
|
ECM
| -
|
Control switch does not operate (-/SET, +/RES, CANCEL not possible)
| Cruise control switch circuit
|
Click here
|
ECM
| -
|
SET possible at 40 km/h (25 mph) or less, or CANCEL does not operate
| Vehicle speed sensor circuit
|
Click here
|
ECM
| -
|
Poor response in ACCEL and RESUME modes
| ECM
| -
|
O/D does not resume, even though road is not uphill
| Vehicle speed sensor circuit
|
Click here
|
ECM
| -
|
DTC memory is erased
| ECM
| -
|
DTC is not output, or is output when it should not be
| TC and CG terminal circuit
|
Click here
|
ECM
| -
|
Cruise main indicator light remains illuminated or fails to light up
| Cruise control switch circuit
|
Click here
|
Combination meter
|
Click here
|
ECM
| -
|