Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/o Entry and Start System)

DTC    B279C    Theft Deterrent System Presence Detection

for Preparation Click here


DESCRIPTION

If an ECM that is incompatible with the engine immobiliser system is installed, the ECM outputs this DTC.

DTC Code
DTC Detection Condition
Trouble Area
B279C
ECM for vehicle without engine immobiliser system is installed on vehicle with engine immobiliser system
ECM

INSPECTION PROCEDURE

1.CLEAR DTC
  1. Clear the DTC (Click here).


NEXT


2.CHECK FOR DTC
  1. Check for DTC (Click here).

    OK:
    DTC B279C is not output.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for 1AZ-FE)
    B
    NG (for 2AZ-FE)
    C
    NG (for 2GR-FE)
    D
    NG (for 3ZR-FAE)
    E



B
REPLACE ECM (Click here)

C
REPLACE ECM (Click here)

D
REPLACE ECM (Click here)

E
REPLACE ECM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)