Home › General › MAINTENANCE › BRAKE
RM30B0U _V1 General _010012 MAINTENANCE _0054827 BRAKE N

MAINTENANCE  BRAKE  GENERAL MAINTENANCE  


PROCEDURE

Hide 1.INSPECT BRAKE PEDAL AND PARKING BRAKE

a.

Inspect the brake pedal and parking brake.

Type See procedures
Brake pedal (Click here)
Parking brake (Click here)


Hide 2.INSPECT BRAKE LININGS AND DRUMS, PADS AND DISCS

a.

Inspect the brake pads and discs.

Type See procedures
Front brake (Click here)
Rear brake (Click here)


b.

Check the parking brake linings and drums.

Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>INSPECTION


Hide 3.INSPECT BRAKE FLUID

a.

Hide 4.REPLACE BRAKE FLUID

a.

Replace the brake fluid.

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID>REPLACEMENT


Hide 5.INSPECT BRAKE LINE PIPES AND HOSES

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


D105797

a.

Using a mirror, check the entire circumference and length of the brake lines and hoses for:

·

Damage

·

Wear

·

Deformation

·

Cracks

·

Kinks

·

Corrosion

·

Leaks

·

Twists



b.

Check all the clamps for tightness and check the connections for leakage.


c.

Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.


d.

Check that the lines are installed properly and pass through the center of the grommets.