Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM
RM30B0U _58 Vehicle Interior _009991 SEAT BELT _0057997 SEAT BELT WARNING SYSTEM J

SEAT BELT  SEAT BELT WARNING SYSTEM  Driver Side Seat Belt Warning Light does not Operate  


DESCRIPTION

The combination meter assembly illuminates, blinks or turns off the front seat belt warning light on the combination meter assembly in accordance with the state of the front seat inner belt assembly LH.

HINT:

The front seat belt warning light on the combination meter assembly is used for both the driver side seat and front passenger side seat.


WIRING DIAGRAM

B342750
5.385,0.313 5.625,0.604 0.24,0.292 10 false 2 5.344,1.115 5.573,1.323 0.229,0.208 10 false 1 4.438,1.094 4.927,1.313 0.49,0.219 10 false 23 4.427,0.323 5.052,0.479 0.625,0.156 10 false 15 5.531,0.323 6.104,0.542 0.573,0.219 10 false LBE+ 5.542,1.323 6.24,1.594 0.698,0.271 10 false LBE- 4.042,1.198 4.448,1.448 0.406,0.25 10 false LBE- 4,0.427 4.5,0.677 0.5,0.25 10 false LBE+ 5.417,1.729 5.99,1.917 0.573,0.188 10 false N14 3.219,1.719 3.792,1.906 0.573,0.188 10 false N21 0.271,1.688 2.094,2.177 1.823,0.49 10 false Main Body ECU (Multiplex Network Body ECU) 0.219,4.198 2.177,4.51 1.958,0.313 10 false Combination Meter Assembly 3.208,1.896 4.99,2.354 1.781,0.458 10 false Airbag Sensor Assembly 5.417,1.906 6.885,2.448 1.469,0.542 10 false Front Seat Inner Belt Assembly LH 5.063,4.302 6.938,4.656 1.875,0.354 10 false : CAN Communication Line

CAUTION / NOTICE / HINT

NOTICE:

The seat belt warning system uses the CAN communication system. First, confirm that there is no malfunction in the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING


PROCEDURE

1.CHECK DTC (AIRBAG SYSTEM)
a.

Clear the DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

b.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188

Result:
Proceed to
DTCs are not output
DTCs are output



DTCs are not output

2.READ VALUE USING TECHSTREAM (LEFT SIDE BUCKLE SW)

DTCs are output

2.READ VALUE USING TECHSTREAM (LEFT SIDE BUCKLE SW)
a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Body Electrical / SRS Airbag / Data List.


e.

Read the Data List according to the display on the Techstream.

Body Electrical > SRS Airbag > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Left side Buckle SW Driver side buckle switch Unset, Set or NG Unset: Front seat belt LH not fastened
Set: Front seat belt LH fastened
NG: Data is not determined
-
Body Electrical > SRS Airbag > Data List
Tester Display
Left side Buckle SW
50003 188 4

Result:
Result Proceed to
Unset or Set is displayed on the Techstream screen according to the driver side seat belt condition A
Unset or Set is not displayed normally on the Techstream screen according to the driver side seat belt condition B
NG is displayed on the Techstream screen C



A

3.REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

B

REPLACE FRONT SEAT INNER BELT ASSEMBLY LH

C

3.REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
a.

Replace the main body ECU (multiplex network body ECU) with a new one or normally one.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


Result:
Proceed to
NEXT



NEXT

4.CHECK FRONT SEAT BELT WARNING LIGHT
4.CHECK FRONT SEAT BELT WARNING LIGHT
a.

Check the operation of the front seat belt warning light.

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM>OPERATION CHECK


Result:
Proceed to
The front seat belt warning light operates normally
The front seat belt warning light does not operate normally



The front seat belt warning light operates normally

END (MAIN BODY ECU [MULTIPLEX NETWORK BODY ECU] WAS DEFECTIVE)

The front seat belt warning light does not operate normally

REPLACE COMBINATION METER ASSEMBLY