1.REMOVE BACK DOOR CENTER GARNISH
2.REMOVE BACK DOOR SIDE GARNISH LH
3.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
4.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
5.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH
6.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH
Use the same procedure described for the LH side.
7.REMOVE REAR LIGHT ASSEMBLY LH
8.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
9.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
10.REMOVE TELEVISION CAMERA ASSEMBLY
Disconnect the connector.
Detach the 2 claws and remove the television camera assembly.