1.INSTALL TELEVISION CAMERA ASSEMBLY
Attach the 2 claws to install the television camera assembly.
Connect the connector.
2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
3.INSTALL REAR LIGHT ASSEMBLY LH
4.INSTALL REAR LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
5.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH
6.INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH
Use the same procedure described for the LH side.
7.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
8.INSTALL BACK DOOR SIDE GARNISH LH
9.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
10.INSTALL BACK DOOR CENTER GARNISH