Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
RM3090E _51 Engine / Hybrid System _008396 2AR-FE ENGINE MECHANICAL _0046880 ENGINE UNIT A

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 22030 1.REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

Hide 23901 2.DISCONNECT FUEL TUBE SUB-ASSEMBLY

Hide 23814B 4.REMOVE FUEL DELIVERY PIPE

Hide 11452 8.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.
A195867

Remove the engine oil level dipstick.


b.

Remove the bolt and engine oil level dipstick guide.


c.

Remove the O-ring from the engine oil level dipstick guide.


Hide 17139 10.REMOVE NO. 2 MANIFOLD STAY

Hide 17167 11.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 17168 12.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

Hide 25051 13.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

Hide 88310 14.REMOVE COOLER COMPRESSOR ASSEMBLY

Hide 88431 15.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

a.
A302694

Remove the 4 bolts and No. 1 compressor mounting bracket.


b.

Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the No. 1 compressor mounting bracket.


Hide 16.REMOVE WATER BY-PASS HOSE

a.
A196855

Slide the clip and disconnect the No. 1 water by-pass hose from the cylinder head sub-assembly.


b.

Slide the clip and disconnect the No. 2 water by-pass hose from the No. 1 water by-pass pipe.


Hide 83530 17.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

Hide 89422 18.REMOVE ENGINE COOLANT TEMPERATURE SENSOR