Home › Engine / Hybrid System › 2AR-FE FUEL › FUEL INJECTOR › 2012.12–2015.04
RM3090E _51 Engine / Hybrid System _008397 2AR-FE FUEL _0046882 FUEL INJECTOR A

2AR-FE FUEL  FUEL INJECTOR  REMOVAL  


PROCEDURE

Hide 1.DISCHARGE FUEL SYSTEM PRESSURE

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 12601B 4.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 17705 5.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 23881B 6.DISCONNECT FUEL HOSE BRACKET

a.
A298969C02
3.063,1.781 2.938,1.781 2.938,1.781 2.25,1.51 true 3.115,1.677 3.427,1.833 0.313,0.156 10 *1
*1 Clamp


Remove the bolt and disconnect the fuel hose bracket.

NOTICE:

If the fuel hose is detached from the clamp shown in the illustration, the clamp cannot be reused.



Hide 23901 7.DISCONNECT FUEL TUBE SUB-ASSEMBLY

NOTICE:

Do not forcibly bend, kink or twist the fuel tube sub-assembly.


a.

Remove the No. 2 fuel pipe clamp and disconnect the fuel tube sub-assembly.

Click hereEngine / Hybrid System>2AR-FE FUEL>FUEL SYSTEM(w/o Canister Pump Module)>PRECAUTION


Hide 8.DISCONNECT WIRE HARNESS

a.
A238141

Disconnect the 4 fuel injector connectors.


b.

Disconnect the 2 connectors.


c.

Remove the 3 bolts and 3 wire harness brackets.


d.

Detach the clamp and disconnect the wire harness.


Hide 23814B 9.REMOVE FUEL DELIVERY PIPE

a.
A196003

Remove the 2 bolts, and then remove the fuel delivery pipe together with the 4 fuel injector assemblies.

NOTICE:

Be careful not to drop the fuel injectors when removing the fuel delivery pipe.



b.
A125335

Remove the 2 fuel delivery spacers from the cylinder head.


c.

Remove the 4 injector vibration insulators from the cylinder head.


Hide 23250 10.REMOVE FUEL INJECTOR ASSEMBLY

a.
A196005C01
0.198,1.406 0.292,1.354 false
V100135

Pull Out


Pull the 4 fuel injector assemblies out of the fuel delivery pipe.


b.

Remove the O-ring.