Home › Engine / Hybrid System › 2AR-FE COOLING › RADIATOR › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008400 2AR-FE COOLING _0046906 RADIATOR A

2AR-FE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 1.DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 52618 4.REMOVE FRONT LOWER BUMPER ABSORBER

a.

Remove the 4 screws and front lower bumper absorber.


Hide 16683 5.REMOVE RADIATOR LOWER AIR GUIDE PLATE

a.

Detach the 2 claws and remove the radiator lower air guide plate.


Hide 74404A 7.REMOVE BATTERY CLAMP SUB-ASSEMBLY

Hide 53629 8.REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)

Hide 53630 10.DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY

a.
A270880

Detach the clamp to disconnect the hood lock control cable assembly from the upper radiator support.


Hide 52029 11.REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

a.
A270869

Disconnect the horn connector.


b.

Remove the 3 bolts and front bumper upper reinforcement sub-assembly.


Hide 16681 12.REMOVE RADIATOR UPPER AIR GUIDE PLATE

a.
A270870

Remove the 7 clips and radiator upper air guide plate.


Hide 88703 13.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

Hide 15.DISCONNECT WIRE HARNESS

a.
A270876C01
0.823,0.146 1.135,0.302 0.313,0.156 10 *a
*a w/o Hood Courtesy Switch


Disconnect the 2 cooling fan motor connectors.


b.

Detach the 9 wire harness clamps to disconnect the wire harness.


Hide 16533B 16.REMOVE NO. 1 RADIATOR SUPPORT

a.
A297220

Remove the 2 bolts and 2 No. 1 radiator supports.


Hide 53216A 17.REMOVE UPPER RADIATOR SUPPORT

a.
A270878

Remove the 4 bolts and upper radiator support.


Hide 16581B 18.REMOVE RADIATOR HOSE HOSE CLAMP

a.
A297219C01
0,3.313 0.198,3.427 0.198,0.115 10 _
V100135

Push


for Manual Transaxle:

i.

Remove the radiator hose hose clamp.



b.
A297218C01
0.885,0.229 1.198,0.385 0.313,0.156 10 *a 0.885,1.073 1.198,1.229 0.313,0.156 10 *a
*a Push


for Automatic Transaxle:

i.

Disconnect the No. 8 and No. 9 water by-pass hose from each radiator hose hose clamp.


ii.

Remove the 2 radiator hose hose clamps.



Hide 16057 19.DISCONNECT RADIATOR HOSE SUB-ASSEMBLY

a.
A196990

Slide the hose clamp and disconnect the radiator hose sub-assembly from the cylinder head sub-assembly.


Hide 16572D 20.DISCONNECT NO. 2 RADIATOR HOSE

Hide 16261G 21.DISCONNECT NO. 1 WATER BY-PASS HOSE

A270897

a.

Slide the hose clamp and disconnect the No. 1 water by-pass hose from the water by-pass pipe.


Hide 16264D 22.DISCONNECT NO. 2 WATER BY-PASS HOSE

A270898

a.

Slide the hose clamp and disconnect the No. 2 water by-pass hose from the radiator assembly.


Hide 16400 23.REMOVE RADIATOR ASSEMBLY

a.

Remove the radiator assembly together with the fan shroud.

HINT:

After removing the radiator assembly, make sure that both lower radiator supports are attached to the fan shroud.



Hide 16057 24.REMOVE RADIATOR HOSE SUB-ASSEMBLY

a.
A270895

Slide the 2 hose clamps and remove the radiator hose sub-assembly from the radiator assembly and water by-pass pipe.


Hide 16572D 25.REMOVE NO. 2 RADIATOR HOSE

a.
A270896

Slide the hose clamp and remove the No. 2 radiator hose from the radiator assembly.


Hide 16268L 26.REMOVE WATER BY-PASS PIPE

a.
A270899

Detach the 3 clamps, slide the hose clamp and remove the water by-pass pipe from the radiator assembly.


Hide 16535 27.REMOVE LOWER RADIATOR SUPPORT

a.

Remove the 2 lower radiator supports from the fan shroud.


Hide 16712 28.REMOVE NO. 2 FAN SHROUD

a.
A270919

Remove the 2 bolts.


b.

Detach the 2 claws and remove the No. 2 fan shroud.


Hide 88460 29.REMOVE COOLER CONDENSER ASSEMBLY

a.

Detach the 2 guides and remove the condenser assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE)>REMOVAL


Hide 16711 30.REMOVE FAN SHROUD

a.

Remove the 2 bolts and fan shroud.