Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) › 2012.12–2015.10
RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0049513 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  REMOVAL  


PROCEDURE

Hide 53896B 1.REMOVE FRONT FENDER FRONT SPLASH SHIELD LH

Hide 53895B 2.REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

HINT:

Use the same procedure described for the LH side.


Hide 52119A 3.REMOVE FRONT BUMPER COVER

Hide 52085 4.REMOVE FRONT BUMPER CENTER STAY SUB-ASSEMBLY

Hide 6.REMOVE HEADLIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52029 7.REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

Hide 16681 8.REMOVE UPPER RADIATOR AIR GUIDE PLATE

Hide 9.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Hide 53388D 10.REMOVE HOOD TO FRONT FENDER SEAL RH

a.
B340664

Remove the clip.


b.

Detach the 3 clips and remove the hood to front fender seal RH.


Hide 53389B 11.REMOVE HOOD TO FRONT FENDER SEAL LH

HINT:

Use the same procedure described for the RH side.


Hide 55701J 12.REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY

Hide 67913B 13.REMOVE FRONT DOOR SCUFF PLATE RH

Hide 62111C 14.REMOVE COWL SIDE TRIM BOARD RH

Hide 55545 15.REMOVE FUSE BOX OPENING COVER

Hide 53601 16.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B338123

Detach the 3 claws.


b.
B338115

Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.


Hide 53629 17.REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)

a.
B338120

Detach the clip and guide, and remove the hood lock control cable cover.


Hide 53510 18.REMOVE HOOD LOCK ASSEMBLY

a.
B338121C02
0.073,0.052 0.385,0.208 0.313,0.156 10 *A 0.073,1.781 0.385,1.938 0.313,0.156 10 *B
*A w/ Engine Hood Courtesy Switch
*B w/o Engine Hood Courtesy Switch


w/ Engine Hood Courtesy Switch:

Disconnect the connector.


b.

Remove the 3 bolts.


c.
B338122C02
0.073,0.073 0.385,0.229 0.313,0.156 10 *A 0.094,1.833 0.406,1.99 0.313,0.156 10 *B
*A w/ Engine Hood Courtesy Switch
*B w/o Engine Hood Courtesy Switch


Disconnect the hood lock control cable assembly and remove the hood lock assembly.


Hide 53630 19.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

a.
B277362C04
1.542,1.231 1.729,1.392 0.187,0.162 10 *1 1.751,1.326 2.492,1.326 false
Text in Illustration
*1 String


Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

HINT:

Use a length of string long enough to pass through the engine compartment.



b.

Detach each clamp, and then pull out the hood lock control cable assembly from the vehicle body.


c.

Untie the string from the hood lock control cable assembly.

B338125C03
5.281,1.271 5.938,1.521 true 3.031,1.177 3.365,0.771 true 4.156,1.188 3.708,0.844 true 1.479,0.49 2.198,0.49 true 0.594,1.521 1.198,1.792 true 0.49,3.823 1.01,3.823 true 1.406,5.063 1.656,5.438 true 5.979,1.458 6.292,1.615 0.313,0.156 10 *1 4.219,1.156 4.531,1.313 0.313,0.156 10 *2 2.896,1.198 3.208,1.354 0.313,0.156 10 *1 1.323,0.417 1.635,0.573 0.313,0.156 10 *1 0.406,1.438 0.719,1.594 0.313,0.156 10 *1 0.333,3.74 0.646,3.896 0.313,0.156 10 *1 1.646,5.458 1.958,5.615 0.313,0.156 10 *1
Text in Illustration
*1 Hood Lock Control Cable *2 Stopper