Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR WINDOW FRAME MOULDING
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050166 FRONT DOOR WINDOW FRAME MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR WINDOW FRAME MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75792 1.INSTALL DOOR WINDOW FRAME MOULDING CLIP

a.

Attach the 2 claws to install the door window frame moulding clip.


Hide 75756C 2.INSTALL FRONT DOOR WINDOW REAR FRAME MOULDING LH

HINT:

When installing the window frame moulding, heat the front door panel and window frame moulding using a heatlight.


Standard:
Item Temperature
Front Door Panel 40 to 60°C (104 to 140°F)
Window Frame Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the front door panel and window frame moulding excessively.


a.

Clean the front door panel surface.

i.

Using a heat light, heat the front door panel surface.


ii.

Remove the double-sided tape from the front door panel surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new front door window rear frame moulding LH.

i.

Using a heat light, heat a new front door window rear frame moulding LH and the front door panel surface.


ii.

Remove the peeling paper from the face of the front door window rear frame moulding LH.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.
B340211C01
1.719,0.979 2.188,0.979 true 2.188,1.573 2.375,1.781 2.375,1.781 2.594,1.781 true 2.208,0.302 2.208,0.115 2.208,0.115 2.635,0.115 true 0.844,1.24 1.052,1.24 1.052,1.24 1.104,1.625 true 2.667,0.052 2.979,0.208 0.313,0.156 10 *1 1.573,0.906 1.885,1.063 0.313,0.156 10 *2 2.615,1.688 2.927,1.844 0.313,0.156 10 *2 0.698,1.156 1.01,1.313 0.313,0.156 10 *1
*1 Protective Tape
*2 Double-sided Tape


Attach the clip and double-sided tape to install the front door window rear frame moulding LH.

HINT:

Press the front door window rear frame moulding LH firmly to install it.




Hide 67862 3.INSTALL FRONT DOOR WEATHERSTRIP LH

a.

Install the front door weatherstrip LH.


Hide 75720 4.INSTALL FRONT DOOR BELT MOULDING ASSEMBLY LH

Hide 68151D 5.INSTALL FRONT DOOR GLASS RUN LH

Hide 68102 6.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

Hide 67832 7.INSTALL FRONT DOOR SERVICE HOLE COVER LH

Hide 87940 8.INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

Hide 67602 9.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

Hide 69284C 10.INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

Hide 74642A 11.INSTALL FRONT DOOR ASSIST GRIP COVER LH

Hide 12.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

Hide 67492A 13.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH

Hide 14.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION