Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › 2013.11–2015.04
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0047058 BLIND SPOT MONITOR SYSTEM T

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



General
Symptom Suspected Area Link
System does not operate at all Proceed to "Power Source Circuit" Click here
CAN communication system (for LHD) Click here
CAN communication system (for RHD) Click here
Proceed to "Main Switch Circuit" Click here
Blind spot monitor sensor LH Click here
System cannot be turned off CAN communication system (for LHD) Click here
CAN communication system (for RHD) Click here
Proceed to "Main Switch Circuit" Click here
Blind spot monitor sensor LH Click here
"BSM not available" is displayed on the multi-information display Check abnormality history Click here
Blind spot monitor sensor RH Click here
Blind spot monitor sensor LH Click here
"Check BSM system" is displayed on the multi-information display Check abnormality history Click here
Blind spot monitor sensor RH Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Outer rear view mirror Sub-assembly RH Click here
Outer rear view mirror assembly RH Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Outer rear view mirror Sub-assembly LH Click here
Outer rear view mirror assembly LH Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH continues to flash Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH continues to flash Blind spot monitor sensor LH Click here

RCTA Function (w/ RCTA Function)
Symptom Suspected Area Link
Function does not operate at all (the blind spot monitor function operates normally) Data List / Active Test (Reverse) Click here
Proceed to "Reverse Signal Circuit" Click here
Automatic transaxle system (for U660F) Click here
Automatic transaxle system (for U760E) Click here
Automatic transaxle system (for U760F) Click here
Continuously variable transaxle system (for K111) Click here
Continuously variable transaxle system (for K111F) Click here
Manual transaxle system (for EB63F) Click here
Manual transaxle system (for EA64) Click here
Manual transaxle system (for EA64F) Click here
Blind spot monitor sensor LH Click here