Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
| *1 | Protruding Part |
Install the front seat inner belt assembly with the nut.
Do not allow the anchor of the front seat inner belt assembly LH to overlap the protruding part of the separate type front seat cushion spring assembly.
Connect each connector and each clamp.
Return the separate type front seat cushion cover to its original position.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
w/o Occupant Detection ECU:
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY>INSTALLATION
| *1 | Protruding Part |
w/ Occupant Detection ECU:
Install the front seat inner belt assembly with the nut.
Do not allow the anchor of the front seat inner belt assembly RH to overlap the protruding part of the separate type front seat cushion spring assembly.
Return the separate type front seat cushion cover to its original position.
Connect each connector and each clamp.
Attach the 2 guides and 2 claws to install the front set inner cushion shield RH.
3.INSTALL FRONT SEAT ASSEMBLY
for Manual Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION
for Power Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION