1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
43457
2.REMOVE DRIVE SHAFT BEARING BRACKET
31105H
3.REMOVE TRANSMISSION CASE OIL SEAL
Using SST, tap out the transmission case oil seal.
31105H
4.REMOVE TRANSAXLE CASE OIL SEAL
Using SST, tap out the transaxle case oil seal.
31105H
5.INSTALL TRANSMISSION CASE OIL SEAL
| *a | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
Coat the lip of a new transmission case oil seal with MP grease.
Using SST and a hammer, tap in the transmission case oil seal.
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the lip of the transmission case oil seal.
31105H
6.INSTALL TRANSAXLE CASE OIL SEAL
| *a | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
Coat the lip of a new transaxle case oil seal with MP grease.
Using SST and a hammer, tap in the transaxle case oil seal.
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the lip of the transaxle case oil seal.
43457
7.INSTALL DRIVE SHAFT BEARING BRACKET
8.INSTALL FRONT DRIVE SHAFT ASSEMBLY