86211
1.INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket with the 3 screws.
86212
2.INSTALL NO. 2 RADIO BRACKET
Install the No. 2 radio bracket with the 3 screws.
86120L
3.INSTALL NAVIGATION RECEIVER ASSEMBLY
Connect each connector.
Attach the 4 clips to install the navigation receiver assembly with bracket.
Install the 4 bolts.
83950M
4.INSTALL TELLTALE LIGHT ASSEMBLY
55670
5.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55680A
6.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
55412C
7.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION