Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
89710
1.INSTALL POSITION CONTROL ECU ASSEMBLY
|
Screw |
|
Connector |
Connect the 3 connectors.
Install the position control ECU assembly with the 3 screws.
2.INSTALL FRONT SEAT ASSEMBLY LH
3. INITIALIZATION OF SEAT ECU (w/ Memory)
for HV Model:
Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (for HV Model with Memory)>REGISTRATION
for Gasoline Model:
Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (for Gasoline Model with Memory)>REGISTRATION
4. PERFORM DIAGNOSTIC SYSTEM CHECK
for HV Model with Occupant Classification System:
for Gasoline Model with Occupant Classification System:
w/o Occupant Classification System:
5.CHECK SRS WARNING LIGHT
for HV Model with Occupant Classification System:
for Gasoline Model with Occupant Classification System:
w/o Occupant Classification System:
6.INSPECT SEAT BELT WARNING SYSTEM
w/ Occupant Classification System:
w/o Occupant Classification System:
7.INSPECT FRONT SEAT ASSEMBLY
for HV Model:
for Gasoline Model:
8.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)
9.INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)
for HV Model:
Click hereVehicle Interior>SEAT>CLIMATE CONTROL SEAT SYSTEM (for HV Model)>OPERATION CHECK
for Gasoline Model:
Click hereVehicle Interior>SEAT>CLIMATE CONTROL SEAT SYSTEM (for Gasoline Model)>OPERATION CHECK