PRECAUTION FOR OPERATION CHECK
Use the correct procedure to replace the airbag parts.
CHECK SRS WARNING LIGHT
Primary check
Turn the power switch on (IG) and check that the SRS warning light turn on.
Turn the power switch off. Wait for at least 2 seconds, and then turn the power switch on (IG). The SRS warning light comes on for approximately 6 seconds and diagnosis of the airbag system (including the seat belt pretensioners) is performed.
Turn the power switch off when the auxiliary battery is connected.
If the warning light remains on for approximately 6 seconds or more after the power switch has been turned on (IG), there may be a malfunction with the SRS airbag system.
If the warning light occasionally turns on approximately 6 seconds or more after the power switch has been turned on (IG), there may be a short to +B, short to ground or an open in the SRS warning light circuit.
If the warning light illuminates after turning the power switch off or on (ACC), there may be a malfunction in the power source circuit or combination meter assembly.
The SRS warning light turns off, and then turns on. This blinking pattern indicates a source voltage drop. The SRS warning light turns off 10 seconds after the source voltage returns to normal.
FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR
Initial check
Turn the power switch on (IG).
The passenger airbag ON/OFF indicator comes on for approximately 4 seconds, and then goes off for approximately 2 seconds.
Approximately 6 seconds after the power switch is turned on (IG), the passenger airbag ON/OFF indicator will indicate ON/OFF depending on the following conditions.
| Front Passenger Seat Condition | Passenger Airbag ON/OFF Indicator | SRS Warning Light | |
|---|---|---|---|
| ON Indicator | OFF Indicator | ||
| Vacant | OFF | ON | OFF |
| Child is seated | |||
| Adult*1 is seated | |||
| Child restraint system is installed | |||
| Child*2 is seated | ON | OFF | OFF |
| Adult is seated | |||
| Occupant classification system failure | OFF | ON | ON |
*1: The system judges a person of average adult weight or more as an adult. If a smaller adult sits in the front passenger seat, the system may not recognize them as an adult depending on their physique and posture.
*2: The system may not recognize a child or a child in a child restraint system as a child depending on factors such as the positioning of the child restraint system or the child's physique or posture.
The timing chart below shows the operation of the passenger airbag ON/OFF indicator. Use the chart to check the indicator light circuit.
When the occupant classification system has trouble, both the SRS warning light and passenger airbag ON/OFF indicator ("OFF") come on. In this case, check for DTCs for "Airbag System" first. Then troubleshoot the occupant classification system if DTC B1650 is output, and troubleshoot the passenger airbag ON/OFF indicator if DTC B1660 is output.
CHECK PASSENGER AIRBAG ON/OFF INDICATOR
Turn the power switch on (IG).
Check that the passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, and then goes off for approximately 2 seconds.
In order to check the operation of the passenger airbag ON/OFF indicator when approximately 6 seconds have elapsed after turning the power switch on (IG), refer to the table in the previous step.
CHECK HORN BUTTON ASSEMBLY
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>STEERING PAD>ON-VEHICLE INSPECTION
CHECK INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY
CHECK LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>KNEE AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION
CHECK FRONT SEAT AIRBAG ASSEMBLY
for Power Seat:
for Manual Seat:
CHECK FRONT SEAT CUSHION AIRBAG ASSEMBLY
CHECK CURTAIN SHIELD AIRBAG ASSEMBLY
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CURTAIN SHIELD AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION
CHECK FRONT SEAT OUTER BELT ASSEMBLY
Click hereVehicle Interior>SEAT BELT>FRONT SEAT OUTER BELT ASSEMBLY>ON-VEHICLE INSPECTION
CHECK REAR SEAT OUTER BELT ASSEMBLY
Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>ON-VEHICLE INSPECTION
CHECK AIRBAG SENSOR ASSEMBLY
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CENTER AIRBAG SENSOR ASSEMBLY>ON-VEHICLE INSPECTION
CHECK FRONT AIRBAG SENSOR
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT AIRBAG SENSOR>ON-VEHICLE INSPECTION
CHECK FLOOR SIDE AIRBAG SENSOR
CHECK FLOOR SIDE AIRBAG SENSOR
CHECK NO. 2 SIDE AIRBAG SENSOR ASSEMBLY
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>REAR AIRBAG SENSOR>ON-VEHICLE INSPECTION
CHECK SIDE AIRBAG PRESSURE SENSOR
CHECK HARNESS AND CONNECTOR
for Vehicle not Involved in Collision
Perform a diagnostic system check.
for Vehicle Involved in Collision and Airbag not Deployed
Perform a diagnostic system check.
for Vehicle Involved in Collision and Airbag is Deployed
Perform a diagnostic system check.
Check any of the wire harnesses in exposed contact with the airbag wire harness for damage.
Check the connector of the airbag wire harness for scratches, cracks or damage.