Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (w/o Occupant Classification System) › 2018.10–2020.08
RM3620E _58 Vehicle Interior _076036 SUPPLEMENTAL RESTRAINT SYSTEMS _0378287 AIRBAG SYSTEM(w/o Occupant Classification System) D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(w/o Occupant Classification System)  OPERATION CHECK  


PRECAUTION FOR OPERATION CHECK


CAUTION:
C376913

Use the correct procedure to replace the airbag parts.



CHECK SRS WARNING LIGHT


a.

Primary check

i.

Turn the ignition switch to ON and check that the SRS warning light turns on.


ii.

Turn the ignition switch off. Wait for at least 2 seconds, and then turn the ignition switch to ON. The SRS warning light comes on for approximately 6 seconds and diagnosis of the airbag system (including the seat belt pretensioners) is performed.

NOTICE:

Turn the ignition switch off when the auxiliary battery is connected.


HINT:
·

If the warning light remains on for approximately 6 seconds or more after the ignition switch has been turned to ON, there may be a malfunction with the SRS airbag system.

·

If the warning light occasionally turns on approximately 6 seconds or more after the ignition switch has been turned to ON, there may be a short to +B, short to ground or an open in the SRS warning light circuit.

·

If the warning light illuminates after turning the ignition switch off or ACC, there may be a malfunction in the power source circuit or combination meter assembly.

·

The SRS warning light turns off, and then turns on. This blinking pattern indicates a source voltage drop. The SRS warning light turns off 10 seconds after the source voltage returns to normal.






FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR (w/ Airbag Cutoff Switch)


a.

Initial check

i.

Turn the ignition switch to ON.


ii.

The passenger airbag ON/OFF indicator comes on for approximately 4 seconds, and then goes off for approximately 2 seconds.


iii.

Approximately 6 seconds after the ignition switch is turned to ON, the passenger airbag ON/OFF indicator will indicate ON/OFF according to the airbag cutoff switch cylinder sub-assembly condition as listed below.

Indicator Operation
Airbag Cutoff Switch Cylinder Sub-assembly Condition Passenger Airbag ON/OFF Indicator SRS Warning Light
ON Indicator OFF Indicator
ON ON OFF OFF
OFF OFF ON OFF
Switch failure OFF ON ON

HINT:

If the passenger airbag ON/OFF indicator does not operate as specified in the table according to the airbag cutoff switch cylinder sub-assembly status and the SRS warning light is not illuminated, no DTC will be output. Therefore, perform troubleshooting for trouble in passenger airbag ON/OFF indicator.


C401812E04
3.5,1.906 3.5,0.729 3.5,0.729 3.656,0.729 false 4.146,1.896 4.146,1 4.146,1 4.302,1 false 4.615,1.906 4.615,1.313 4.615,1.313 4.771,1.313 false 0.135,2.542 1.802,3.375 1.667,0.833 10 false Passenger Airbag ON/OFF Indicator ("OFF Indicator"): 1.927,0.49 2.302,0.688 0.375,0.198 10 false ON 0.188,0.917 1.188,1.177 1,0.26 10 false Ignition Switch 1.969,1.219 2.948,1.76 0.979,0.542 10 false Off 1.969,2.927 2.948,3.469 0.979,0.542 10 false Off 1.875,2.188 2.854,2.729 0.979,0.542 10 false On 1.938,4.385 2.896,4.813 0.958,0.427 10 false Off 1.948,3.688 2.927,4.229 0.979,0.542 10 false On 0.104,0.052 4.396,0.573 4.292,0.521 12 false When passenger airbag is ready for activation: 3.771,0.656 5.792,1.115 2.021,0.458 10 false Approximately 4 seconds 4.396,0.927 6,1.74 1.604,0.813 10 false Approximately 2 seconds 4.875,1.24 5.833,2.219 0.958,0.979 10 false Approximately 60 seconds 0.063,3.979 1.729,4.813 1.667,0.833 10 false Passenger Airbag ON/OFF Indicator ("ON Indicator"):

C401813E04
3.375,1.896 3.375,0.719 3.375,0.719 3.531,0.719 false 4.073,1.906 4.073,1 4.073,1 4.229,1 false 0.094,2.563 1.75,3.24 1.656,0.677 10 false Passenger Airbag ON/OFF Indicator ("OFF Indicator"): 1.927,0.479 2.281,0.698 0.354,0.219 10 false ON 0.188,0.917 1.167,1.458 0.979,0.542 10 false Ignition Switch 1.948,1.208 2.927,1.75 0.979,0.542 10 false Off 1.979,2.917 2.958,3.458 0.979,0.542 10 false Off 2.021,2.188 3,2.729 0.979,0.542 10 false On 1.969,4.385 2.958,4.813 0.99,0.427 10 false Off 2,3.635 2.979,4.177 0.979,0.542 10 false On 0.083,0.042 4.146,0.521 4.063,0.479 12 false When passenger airbag is not ready for activation: 3.635,0.635 5.656,1.094 2.021,0.458 10 false Approximately 4 seconds 4.313,0.906 6.01,1.646 1.698,0.74 10 false Approximately 2 seconds 0.104,4.021 1.76,4.74 1.656,0.719 10 false Passenger Airbag ON/OFF Indicator ("ON Indicator"):




CHECK PASSENGER AIRBAG ON/OFF INDICATOR (w/ Airbag Cutoff Switch)


a.

Turn the ignition switch to ON.


b.

Check that the passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, and then goes off for approximately 2 seconds.

C401805

HINT:

In order to check the operation of the passenger airbag ON/OFF indicator when approximately 6 seconds have elapsed after turning the ignition switch to ON, refer to the table in the previous step.





CHECK INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT PASSENGER AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION


CHECK LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>KNEE AIRBAG ASSEMBLY>ON-VEHICLE INSPECTION





CHECK REAR SEAT OUTER BELT ASSEMBLY (w/ Rear Pretensioner)


Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>ON-VEHICLE INSPECTION







CHECK HARNESS AND CONNECTOR


a.

for Vehicle not Involved in Collision

i.

Perform a diagnostic system check.



b.

for Vehicle Involved in Collision and Airbag not Deployed

i.

Perform a diagnostic system check.



c.

for Vehicle Involved in Collision and Airbag is Deployed

i.

Perform a diagnostic system check.


ii.

Check any of the wire harnesses in exposed contact with the airbag wire harness for damage.


iii.

Check the connector of the airbag wire harness for scratches, cracks or damage.