Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)
RM3620E _58 Vehicle Interior _076406 SEAT BELT _0372036 FRONT SEAT INNER BELT ASSEMBLY(for Power Seat) A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Power Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B526553

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 73240 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

a.

Install the front seat belt anchor plate.


b.
B521731C01
0.583,1.958 1.25,1.552 true 0.385,1.906 0.563,2.094 0.177,0.188 10 false *a
*a Protruding Part


Install the front seat inner belt assembly LH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part.



c.

Attach the clamp.

B521729C02
4.625,0.115 4.854,0.313 0.229,0.198 10 true *A
*A w/ Seat Position Airbag Sensor - -



d.

w/ Seat Position Airbag Sensor:

i.

Connect the connector.



e.

Attach the claw.


Hide 8.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

Hide 9.INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)