Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
33504F
1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (except Manual Transaxle)
for Automatic Transaxle:
for UB80E:
Click hereDrivetrain>UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER KNOB>REMOVAL
for UB80F:
Click hereDrivetrain>UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER KNOB>REMOVAL
for CVT:
for K120:
Click hereDrivetrain>K120 (MULTIDRIVE / CVT)>SHIFT LEVER KNOB>REMOVAL
for K120F:
Click hereDrivetrain>K120F (MULTIDRIVE / CVT)>SHIFT LEVER KNOB>REMOVAL
for HV Model:
33504F
2.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
58804A
3.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
861C0
4.REMOVE MOBILE WIRELESS CHARGER CRADLE ASSEMBLY
Rotate in the direction indicated by the arrow (1) shown in the illustration to detach the clip.
Pull in the direction indicated by the arrow (2) shown in the illustration to detach the guide and remove the mobile wireless charger cradle assembly.
| *A | except Manual Transaxle | *B | for Manual Transaxle |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
w/ Radio Receiver:
Detach the clamp and disconnect the 3 connectors.
| *A | except Manual Transaxle | *B | for Manual Transaxle |
w/o Radio Receiver:
Detach the clamp and disconnect the 2 connectors.
| *A | except Manual Transaxle | *B | for Manual Transaxle |
86190C
5.REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY (w/ Radio Receiver)
55524A
6.REMOVE SWITCH BASE HOLE COVER (w/o Radio Receiver)
85530
7.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
85535B
8.REMOVE NO. 1 POWER OUTLET SOCKET COVER