87510Q
1.INSTALL REAR SEAT CUSHION HEATER ASSEMBLY LH
| *1 | Tag Pin |
| *a | Clamp |
Using a tacker, install the rear seat cushion heater assembly LH to the bench type rear seat cushion cover with 20 new tag pins as shown in the illustration.
Do not substitute other metal parts for tag pins.
Attach the clamp.
87510P
2.INSTALL REAR SEAT CUSHION HEATER ASSEMBLY RH
Use the same procedure described for the LH side.
71075B
3.INSTALL BENCH TYPE REAR SEAT CUSHION COVER
72693
4.INSTALL REAR SEAT CUSHION LOCK HOOK
5.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
6.INSPECT SEAT BELT WARNING SYSTEM (w/ Occupant Detection Sensor)
7.INSPECT SEAT HEATER SYSTEM