Home › Engine / Hybrid System › M20A-FKS (COOLING) › RADIATOR
RM3620E _51 Engine / Hybrid System _076658 M20A-FKS COOLING _0373130 RADIATOR A

M20A-FKS COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16535 1.INSTALL LOWER RADIATOR SUPPORT

a.

Install the 2 lower radiator supports to the radiator assembly.


Hide 16523A 2.INSTALL RADIATOR SUPPORT CUSHION

a.

Install the 2 radiator support cushions to the radiator assembly.


Hide 16400 3.INSTALL RADIATOR ASSEMBLY

a.

Attach the 2 guides.


b.

Attach the 2 claws to install the fan with motor assembly to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan with motor assembly.



c.

Install the radiator assembly with the fan with motor assembly to the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or pipe when installing the radiator assembly with the fan with motor assembly.



d.

Attach the 2 guides.


e.

Attach the 2 claws to install the cooler condenser assembly to the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly when installing the cooler condenser assembly.



f.
A435713C01
1,0.448 1.167,0.208 1.167,0.208 1.344,0.208 false 1.406,0.125 1.719,0.281 0.313,0.156 10 false *a
*a Lock Lever


Attach the 2 wire harness clamps.


g.

Connect the cooling fan motor connector and push down the lock lever to attach the claw as shown in the illustration.

NOTICE:
·

When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.

·

Be sure to securely connect the cooling fan motor connector.




Hide 16572D 4.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.

A435737C01
5.365,0.656 4.927,1.344 true 3.448,0.208 3.76,0.365 0.313,0.156 10 false *a 5.219,1.74 5.531,1.896 0.313,0.156 10 false *b 5.385,0.5 5.594,0.656 0.208,0.156 10 true *c 4.479,0.438 4.792,0.594 0.313,0.156 10 false *d 2.094,1.771 2.302,1.938 0.208,0.167 10 true A 6.167,1.833 6.479,1.99 0.313,0.156 10 false *f 5.396,1.281 5.708,1.438 0.313,0.156 10 false *e
*a View A *b 120°
*c Paint Mark *d Upper Side
*e RH Side *f 2 to 5 mm (0.0787 to 0.197 in.)


NOTICE:
·

Align the direction of the claw on the clip with the paint mark on the hose.

·

Make sure the No. 2 radiator hose is securely inserted to the stopper.




b.

Attach the clamp to connect the No. 2 radiator hose to the fan with motor assembly.


Hide 16571C 5.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.

A435739C01
3.594,0.76 4.094,1.333 true 3.167,0.188 3.479,0.344 0.313,0.156 10 false *a 3.688,1.719 4,1.875 0.313,0.156 10 false *b 3.396,0.635 3.604,0.792 0.208,0.156 10 true *c 4.354,0.438 4.667,0.594 0.313,0.156 10 false *d 1.49,1.813 1.698,1.979 0.208,0.167 10 true A 5.875,1.813 6.188,1.969 0.313,0.156 10 false *f 5.083,1.281 5.396,1.438 0.313,0.156 10 false *e
*a View A *b 120°
*c Paint Mark *d Upper Side
*e RH Side *f 2 to 5 mm (0.0787 to 0.197 in.)


NOTICE:
·

Align the direction of the claw on the clip with the paint mark on the hose.

·

Make sure the No. 1 radiator hose is securely inserted to the stopper.




b.

Attach the clamp to connect the No. 1 radiator hose to the fan with motor assembly.


Hide 16283 6.CONNECT NO. 6 WATER BY-PASS HOSE

a.

Connect the No. 6 water by-pass hose to the radiator assembly.


Hide 16282 7.CONNECT NO. 5 WATER BY-PASS HOSE

a.

Connect the No. 5 water by-pass hose to the radiator assembly and slide the clip to secure it.

A435742C01
5.156,0.677 4.469,1.354 true 3.333,0.323 3.646,0.479 0.313,0.156 10 false *a 4.948,1.698 5.26,1.854 0.313,0.156 10 false *b 5.208,0.573 5.417,0.729 0.208,0.156 10 true *c 4.177,0.479 4.49,0.635 0.313,0.156 10 false *d 1.99,1.438 2.198,1.604 0.208,0.167 10 true A 5.865,1.813 6.177,1.969 0.313,0.156 10 false *f 5.104,1.281 5.417,1.438 0.313,0.156 10 false *e
*a View A *b 120°
*c Paint Mark *d Upper Side
*e Rear Side *f 2 to 5 mm (0.0787 to 0.197 in.)


NOTICE:
·

Align the direction of the claw on the clip with the paint mark on the hose.

·

Make sure the No. 5 water by-pass hose is securely inserted to the stopper.




Hide 53205 8.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.

Install the upper radiator support sub-assembly with the 4 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Attach the 3 clamps to connect the wire harness to the upper radiator support sub-assembly.


c.

Attach the 2 clamps to connect the hood lock control cable assembly to the upper radiator support sub-assembly.


d.

Connect the 2 horn connectors.


Hide 16593B 10.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.

Attach the guide and claw and install the No. 1 radiator air guide RH.


b.

Install the clip.


Hide 16595B 11.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.

Attach the guide and claw and install the No. 1 radiator air guide LH.


b.

Install the clip.


Hide 88790B 12.INSTALL THERMISTOR ASSEMBLY (w/o Grille Shutter)

Hide 53019F 13.INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (w/ Grille Shutter)

Hide 16681A 14.INSTALL UPPER RADIATOR AIR GUIDE PLATE

a.

Install the radiator upper air guide plate with the 5 clips.


Hide 17750A 15.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 52021 16.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

Hide 52614 17.INSTALL FRONT BUMPER NO. 2 ENERGY ABSORBER

Hide 19.ADD ENGINE COOLANT

Hide 51420 21.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 51441 22.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53896B 23.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

Hide 53895B 24.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH