Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)
RM3620E _56 Audio / Visual / Telematics _076047 AUDIO / VIDEO _0370280 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Radio Broadcast cannot be Received or Poor Reception  


WIRING DIAGRAM

E402574E10
0.135,3.365 1.344,4.031 1.208,0.667 10 false No. 1 Amplifier Antenna Assembly 1.396,1.552 1.76,1.938 0.365,0.385 10 false A 1.406,2.25 1.771,2.635 0.365,0.385 10 false A 1.406,2.906 1.771,3.292 0.365,0.385 10 false A 2.781,1.563 3.146,1.948 0.365,0.385 10 false B 2.781,2.24 3.146,2.625 0.365,0.385 10 false B 2.781,2.917 3.146,3.302 0.365,0.385 10 false B 4.188,1.573 4.552,1.958 0.365,0.385 10 false C 4.177,2.24 4.542,2.625 0.365,0.385 10 false C 4.188,2.917 4.552,3.302 0.365,0.385 10 false C 5.531,1.563 5.896,1.948 0.365,0.385 10 false RA 5.563,2.24 5.927,2.625 0.365,0.385 10 false RA 5.542,2.917 5.906,3.302 0.365,0.385 10 false RA 2.927,3.51 4.177,4.031 1.25,0.521 10 false No. 3 Antenna Cord Sub-assembly 1.51,3.521 2.76,4.042 1.25,0.521 10 false No. 4 Antenna Cord Sub-assembly 4.375,3.51 5.625,4.031 1.25,0.521 10 false Antenna Cord Sub-assembly 5.802,3.406 7.01,3.969 1.208,0.563 10 false Radio and Display Receiver Assembly 5.906,1.573 6.438,1.833 0.531,0.26 10 false ANT+ 5.917,2.229 6.448,2.49 0.531,0.26 10 false MAIN 5.604,2.708 6.135,2.969 0.531,0.26 10 false 4 5.604,1.344 6.135,1.604 0.531,0.26 10 false 5 5.594,2.021 6.125,2.281 0.531,0.26 10 false 3 4.198,1.354 4.729,1.615 0.531,0.26 10 false 2 4.198,2.021 4.729,2.281 0.531,0.26 10 false 4 4.167,2.698 4.698,2.958 0.531,0.26 10 false 4a 2.792,1.365 3.323,1.625 0.531,0.26 10 false 2 1.396,1.354 1.927,1.615 0.531,0.26 10 false 1 2.792,2.031 3.323,2.292 0.531,0.26 10 false 4 2.771,2.698 3.302,2.958 0.531,0.26 10 false 4a 1.375,2.688 1.906,2.948 0.531,0.26 10 false 2a 1.417,2.031 1.948,2.292 0.531,0.26 10 false 2 0.125,0.063 4.25,0.26 4.125,0.198 12 false w/o Telematics Transceiver and w/o DAB Function:

E402574E11
0.26,0.125 3.677,0.479 3.417,0.354 12 false w/ Telematics Transceiver or w/ DAB Function: 0.135,3.365 1.344,4.031 1.208,0.667 10 false No. 1 Amplifier Antenna Assembly 1.396,1.552 1.76,1.938 0.365,0.385 10 false A 1.406,2.25 1.771,2.635 0.365,0.385 10 false A 1.406,2.906 1.771,3.292 0.365,0.385 10 false A 2.781,1.563 3.146,1.948 0.365,0.385 10 false B 2.781,2.24 3.146,2.625 0.365,0.385 10 false B 2.781,2.917 3.146,3.302 0.365,0.385 10 false B 4.188,1.573 4.552,1.958 0.365,0.385 10 false C 4.177,2.24 4.542,2.625 0.365,0.385 10 false C 4.188,2.917 4.552,3.302 0.365,0.385 10 false C 5.531,1.563 5.896,1.948 0.365,0.385 10 false RA 5.563,2.24 5.927,2.625 0.365,0.385 10 false RA 5.542,2.917 5.906,3.302 0.365,0.385 10 false RA 2.938,3.521 4.188,4.042 1.25,0.521 10 false No. 3 Antenna Cord Sub-assembly 1.5,3.521 2.75,4.042 1.25,0.521 10 false No. 4 Antenna Cord Sub-assembly 4.385,3.531 5.635,4.052 1.25,0.521 10 false Antenna Cord Sub-assembly 5.802,3.406 7.01,3.969 1.208,0.563 10 false Radio and Display Receiver Assembly 5.906,1.573 6.438,1.833 0.531,0.26 10 false ANT+ 5.917,2.229 6.448,2.49 0.531,0.26 10 false MAIN 5.604,2.708 6.135,2.969 0.531,0.26 10 false 4 5.604,1.344 6.135,1.604 0.531,0.26 10 false 5 5.594,2.021 6.125,2.281 0.531,0.26 10 false 3 4.198,1.354 4.729,1.615 0.531,0.26 10 false 4 4.198,2.021 4.729,2.281 0.531,0.26 10 false 6 4.167,2.698 4.698,2.958 0.531,0.26 10 false 6a 2.792,1.365 3.323,1.625 0.531,0.26 10 false 4 1.396,1.354 1.927,1.615 0.531,0.26 10 false 1 2.792,2.031 3.323,2.292 0.531,0.26 10 false 6 2.771,2.698 3.302,2.958 0.531,0.26 10 false 6a 1.375,2.688 1.906,2.948 0.531,0.26 10 false 2a 1.417,2.031 1.948,2.292 0.531,0.26 10 false 2

CAUTION / NOTICE / HINT

NOTICE:

When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:

·

A communication malfunction DTC may be stored.

·

The radio and display receiver assembly may not operate normally.



HINT:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type)>PRECAUTION


PROCEDURE

1.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check the radio automatic station search function by activating it.

OK:

Automatic station search function stops on a station.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

2.CHECK OPTIONAL COMPONENTS
2.CHECK OPTIONAL COMPONENTS
a.

Check if any optional components that may decrease reception capacity, such as sunshade film or a telephone antenna, are installed.

OK:

Optional components are not installed.


NOTICE:

Do not remove optional components without the permission of the customer.



Result:
Proceed to
OK
NG



OK

3.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REMOVE OPTIONAL COMPONENTS AND CHECK AGAIN (SEE NOTICE ABOVE)

3.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.
E245523

Preparation for check

i.

Disconnect the RA radio and display receiver assembly connector.



b.

Check for noise

i.

Turn the ignition switch to ON with the radio and display receiver assembly connector connected.


ii.

Turn the radio and display receiver assembly on and tune into AM mode.


iii.

Place a screwdriver, thin wire or other metal object on the radio and display receiver assembly antenna jack and check that noise can be heard from the speakers.

OK:

Noise can be heard from the speakers.




Result:
Proceed to
OK
NG



OK

4.INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

4.INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Disconnect the RA radio and display receiver assembly connector.


b.
E188455C09
0.479,0.958 1.01,1.25 0.531,0.292 1.521,1.094 1.115,1.448 false 0.115,0.083 0.292,0.25 0.177,0.167 10 *a 0.656,1.021 0.948,1.188 0.292,0.167 10 RA 0.802,1.469 1.198,1.635 0.396,0.167 10 ANT+
*a Component without harness connected
(Radio and Display Receiver Assembly)


Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
RA-5 (ANT+) - Body ground Ignition switch ACC
Radio switch on and FM or AM selected
11 to 14 V



Result:
Proceed to
OK
NG



OK

5.CHECK VEHICLE CONDITION

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

5.CHECK VEHICLE CONDITION
a.

Check the vehicle condition.


Result:
Result Proceed to
w/o Telematics Transceiver and w/o DAB Function A
w/ Telematics Transceiver or w/ DAB Function B



A

6.CHECK NO. 4 ANTENNA CORD SUB-ASSEMBLY

B

10.CHECK NO. 4 ANTENNA CORD SUB-ASSEMBLY
6.CHECK NO. 4 ANTENNA CORD SUB-ASSEMBLY
a.
E401205C03
1.573,0.156 2.01,0.406 0.438,0.25 2.26,2.302 2.719,2.615 0.458,0.313 0.771,0.583 0.938,0.583 0.938,0.583 1.427,1.094 true 1.094,1.677 1.26,1.677 1.26,1.677 1.74,2.031 true 0.104,0.052 0.417,0.208 0.313,0.156 10 false *a 0.156,1.656 0.469,1.813 0.313,0.156 10 false *b 0.5,0.479 0.896,0.698 0.396,0.219 10 false 4-a 0.823,1.573 1.219,1.792 0.396,0.219 10 false 2-a 1.729,0.208 2.125,0.427 0.396,0.219 10 false B 2.448,2.385 2.844,2.604 0.396,0.219 10 false A
*a Front view of wire harness connector
(to No. 3 Antenna Cord Sub-assembly)
*b Front view of wire harness connector
(to No. 1 Amplifier Antenna Assembly)


Disconnect the antenna connector from the No. 1 amplifier antenna assembly.


b.

Disconnect the antenna connector from the No. 3 antenna cord sub-assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-2 - B-4 Always Below 1 Ω
A-2a - B-4a Always Below 1 Ω
A-1 - B-2 Always Below 1 Ω
A-2 - Body ground Always 10 kΩ or higher
A-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

7.CHECK NO. 3 ANTENNA CORD SUB-ASSEMBLY

NG

7.CHECK NO. 3 ANTENNA CORD SUB-ASSEMBLY
a.
E402572C01
1.542,0.333 1.875,0.635 0.333,0.302 1.531,2.583 1.865,2.885 0.333,0.302 2.094,1.583 2.292,1.104 2.292,1.104 2.5,1.104 true 2.083,3.615 2.281,3.135 2.281,3.135 2.49,3.135 true 0.198,0.156 0.51,0.354 0.313,0.198 10 false *a 0.25,2.625 0.563,2.823 0.313,0.198 10 false *b 1.656,0.396 1.813,0.594 0.156,0.198 10 false B 1.656,2.667 1.813,2.865 0.156,0.198 10 false C 2.552,1.021 2.771,1.26 0.219,0.24 10 false 4a 2.542,3.052 2.76,3.292 0.219,0.24 10 false 4a
*a Front view of wire harness connector
(to No. 4 Antenna Cord Sub-assembly)
*b Front view of wire harness connector
(to Antenna Cord Sub-assembly)


Disconnect the antenna connector from the No. 4 antenna cord sub-assembly.


b.

Disconnect the antenna connector from the antenna cord sub-assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-4 - C-4 Always Below 1 Ω
B-4a - C-4a Always Below 1 Ω
B-2 - C-2 Always Below 1 Ω
B-4 - Body ground Always 10 kΩ or higher
B-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

8.CHECK ANTENNA CORD SUB-ASSEMBLY

NG

8.CHECK ANTENNA CORD SUB-ASSEMBLY
a.
E402573C01
1.521,0.292 1.979,0.615 0.458,0.323 1.479,2.302 1.938,2.625 0.458,0.323 1.083,4.396 1.281,4.396 1.281,4.396 1.573,3.927 true 1.083,3.604 1.281,3.604 1.281,3.604 1.5,3.844 true 2,3.656 2.302,3.281 2.302,3.281 2.49,3.281 true 0.688,1.177 0.885,1.177 0.885,1.177 1.344,1.583 true 0.229,0.188 0.542,0.385 0.313,0.198 10 false *a 0.313,2.531 0.625,2.729 0.313,0.198 10 false *b 1.698,0.365 2.01,0.563 0.313,0.198 10 false C 1.615,2.385 1.927,2.583 0.313,0.198 10 false RA 0.698,4.302 1.313,4.5 0.615,0.198 10 false MAIN 2.552,3.198 3.167,3.396 0.615,0.198 10 false ANT+ 0.948,3.521 1.563,3.719 0.615,0.198 10 false 4 0.49,1.083 1.104,1.281 0.615,0.198 10 false 4a
*a Front view of wire harness connector
(to No. 3 Antenna Cord Sub-assembly)
*b Front view of wire harness connector
(to Radio and Display Receiver Assembly)


Disconnect the antenna connector from the No. 3 antenna cord sub-assembly.


b.

Disconnect the antenna connector from the radio and display receiver assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C-4 - RA-3 (MAIN) Always Below 1 Ω
C-4a - RA-4 Always Below 1 Ω
C-2 - RA-5 (ANT+) Always Below 1 Ω
C-4 - Body ground Always 10 kΩ or higher
C-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

9.CHECK NO. 1 AMPLIFIER ANTENNA ASSEMBLY

NG

9.CHECK NO. 1 AMPLIFIER ANTENNA ASSEMBLY
a.

Replace the No. 1 amplifier antenna assembly with a new or known good one and check if radio broadcasts can be received normally.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEPHONE ANTENNA>REMOVAL

OK:

Radio broadcasts can be received normally.



Result:
Proceed to
OK
NG



OK

END (NO. 1 AMPLIFIER ANTENNA ASSEMBLY IS DEFECTIVE)

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

10.CHECK NO. 4 ANTENNA CORD SUB-ASSEMBLY
a.
E408072C01
0.385,0.573 0.854,0.833 0.469,0.26 0.427,2.094 0.896,2.354 0.469,0.26 0.375,3.635 0.844,3.896 0.469,0.26 1.802,0.396 2.167,0.708 2.167,0.708 2.365,0.708 true 1.615,2.208 1.448,1.875 1.448,1.875 1.25,1.875 true 1.406,3.833 1.573,3.333 1.573,3.333 1.771,3.333 true 0.563,0.615 0.719,0.813 0.156,0.198 10 false A 0.083,0.094 0.24,0.292 0.156,0.198 10 false *a 0.115,1.438 0.271,1.635 0.156,0.198 10 false *b 0.615,2.146 0.771,2.344 0.156,0.198 10 false A 0.573,3.677 0.729,3.875 0.156,0.198 10 false B 0.125,3.292 0.281,3.49 0.156,0.198 10 false *c 2.417,0.635 2.656,0.906 0.24,0.271 10 false 2a 1.063,1.802 1.302,2.073 0.24,0.271 10 false 2a 1.813,3.25 2.052,3.521 0.24,0.271 10 false 6a
*a Front view of wire harness connector
(to No. 1 Amplifier Antenna Assembly [w/o Telematics Transceiver and w/ DAB Function])
*b Front view of wire harness connector
(to No. 1 Amplifier Antenna Assembly [w/ Telematics Transceiver and w/ DAB Function])
*c Front view of wire harness connector
(to No. 3 Antenna Cord Sub-assembly)


Disconnect the antenna connector from the No. 1 amplifier antenna assembly.


b.

Disconnect the antenna connector from the No. 3 antenna cord sub-assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-2 - B-6 Always Below 1 Ω
A-2a - B-6a Always Below 1 Ω
A-1 - B-4 Always Below 1 Ω
A-2 - Body ground Always 10 kΩ or higher
A-2a - Body ground Always 10 kΩ or higher
A-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

11.CHECK NO. 3 ANTENNA CORD SUB-ASSEMBLY

NG

11.CHECK NO. 3 ANTENNA CORD SUB-ASSEMBLY
a.
E402568C04
1.542,0.333 1.875,0.635 0.333,0.302 1.531,2.74 1.865,3.042 0.333,0.302 2.583,1.354 2.781,0.875 2.781,0.875 2.99,0.875 true 2.583,3.76 2.781,3.281 2.781,3.281 2.99,3.281 true 0.198,0.156 0.51,0.354 0.313,0.198 10 false *a 0.25,2.625 0.563,2.823 0.313,0.198 10 false *b 1.656,0.396 1.813,0.594 0.156,0.198 10 false B 1.646,2.813 1.802,3.01 0.156,0.198 10 false C 3.052,0.813 3.271,1.052 0.219,0.24 10 false 6a 3.052,3.208 3.271,3.448 0.219,0.24 10 false 6a
*a Front view of wire harness connector
(to No. 4 Antenna Cord Sub-assembly)
*b Front view of wire harness connector
(to Antenna Cord Sub-assembly)


Disconnect the antenna connector from the No. 4 antenna cord sub-assembly.


b.

Disconnect the antenna connector from the antenna cord sub-assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-6 - C-6 Always Below 1 Ω
B-6a - C-6a Always Below 1 Ω
B-4 - C-4 Always Below 1 Ω
B-6 - Body ground Always 10 kΩ or higher
B-6a - Body ground Always 10 kΩ or higher
B-4 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

12.CHECK ANTENNA CORD SUB-ASSEMBLY

NG

12.CHECK ANTENNA CORD SUB-ASSEMBLY
a.
E402570C01
1.521,0.292 1.979,0.615 0.458,0.323 1.479,2.302 1.938,2.625 0.458,0.323 1.083,4.396 1.281,4.396 1.281,4.396 1.573,3.927 true 1.042,3.594 1.24,3.594 1.24,3.594 1.458,3.833 true 1.99,3.615 2.292,3.24 2.292,3.24 2.479,3.24 true 0.344,0.927 0.542,0.927 0.542,0.927 1,1.333 true 0.229,0.188 0.542,0.385 0.313,0.198 10 false *a 0.313,2.531 0.625,2.729 0.313,0.198 10 false *b 1.698,0.365 2.01,0.563 0.313,0.198 10 false C 1.615,2.385 1.927,2.583 0.313,0.198 10 false RA 0.688,4.292 1.302,4.49 0.615,0.198 10 false MAIN 2.552,3.167 3.167,3.365 0.615,0.198 10 false ANT+ 0.917,3.51 1.531,3.708 0.615,0.198 10 false 4 0.135,0.833 0.75,1.031 0.615,0.198 10 false 6a
*a Front view of wire harness connector
(to No. 3 Antenna Cord Sub-assembly)
*b Front view of wire harness connector
(to Radio and Display Receiver Assembly)


Disconnect the antenna connector from the No. 3 antenna cord sub-assembly.


b.

Disconnect the antenna connector from the radio and display receiver assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C-6 - RA-3 (MAIN) Always Below 1 Ω
C-6a - RA-4 Always Below 1 Ω
C-4 - RA-5 (ANT+) Always Below 1 Ω
C-6 - Body ground Always 10 kΩ or higher
C-6a - Body ground Always 10 kΩ or higher
C-4 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

9.CHECK NO. 1 AMPLIFIER ANTENNA ASSEMBLY

NG