Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (except Off Road Package) › 2018.10–2020.08
RM3620E _59 Vehicle Exterior _076404 EXTERIOR PANELS / TRIM _0377205 FRONT BUMPER(except Off Road Package) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(except Off Road Package)  DISASSEMBLY  


PROCEDURE

Hide 82821K 1.REMOVE CONNECTOR COVER (w/o Wire Harness)

a.
B525972

Detach the clamp and remove the connector cover.


Hide 2.REMOVE FOG LIGHT SEAL (w/o TOYOTA Parking Assist-sensor System)

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



a.
B525975

Remove the fog light seal.


Hide 85354 3.REMOVE HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)

Hide 85353 4.REMOVE HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure described for the LH side.


Hide 85208A 5.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

Hide 85207A 6.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure described for the LH side.


Hide 85271 7.REMOVE NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)

a.

Detach the clamp and remove the No. 1 headlight cleaner hose.

B526275


Hide 82114 8.REMOVE NO. 4 ENGINE ROOM WIRE (w/ Wire Harness)

a.

w/o Toyota Parking Assist-sensor System:

i.

Disconnect each connector.

B525989C01
4.917,2 6.25,2 true 4.917,1.667 6.177,1.698 true 4.917,2.25 4.917,1.083 true 4.917,1.385 5.25,1.385 true 4.208,0.906 4.208,0.406 true 3.583,0.75 3.583,0.417 true 3.583,0.417 4.917,0.417 true 0.99,1.958 1.229,2.188 0.24,0.229 12 true *A 6.729,2.146 6.969,2.375 0.24,0.229 12 true *A 3.781,1.052 4.021,1.281 0.24,0.229 12 true *B 4.823,2.24 5.063,2.469 0.24,0.229 12 true *A 4.927,0.333 5.167,0.563 0.24,0.229 12 true *A
*A w/ Fog Light *B w/ Dynamic Radar Cruise Control System



ii.

Detach the clamp and remove the No. 4 engine room wire.



b.

w/ Toyota Parking Assist-sensor System, w/o Parking Support Brake System:

i.

Disconnect each connector.

B525988C01
3.177,1.719 3.177,1.135 false 3.469,1.75 3.708,1.948 0.24,0.198 12 true *A 3.833,1.083 4.104,1.292 0.271,0.208 12 true *B 2.885,1.688 3.354,1.906 0.469,0.219 12 true *A,*B
*A w/ Panoramic View Monitor System *B w/ Dynamic Radar Cruise Control System



ii.

Detach the clamp and remove the No. 4 engine room wire.



c.

w/ Toyota Parking Assist-sensor System, w/ Parking Support Brake System:

i.

Disconnect each connector.

B525987C01
3.49,1.719 3.76,1.958 0.271,0.24 12 true *A
*A w/ Panoramic View Monitor System - -



ii.

Detach the clamp and remove the No. 4 engine room wire.



Hide 89348X 9.REMOVE FRONT ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

Hide 89341K 10.REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89341L 11.REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89347B 12.REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 88211B 13.REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

Hide 14.REMOVE NUT

a.
B525784C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 2 nuts.


Hide 52114A 15.REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET

a.

for Type A:

i.
B526276

Remove the 2 screws.


ii.
B525552C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and guide to remove the front bumper extension mounting bracket as shown in the illustration.



b.

for Type B:

i.
B522115

Remove the 2 screws.


ii.
B525554C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the guide to remove the front bumper extension mounting bracket as shown in the illustration.



c.

for Type C:

i.
B522115

Remove the 2 screws and front bumper extension mounting bracket.



Hide 81220 16.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 17.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 53395E 18.REMOVE FRONT HOOD TO END PANEL SEAL

a.
B522105C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the clip and remove the front hood to end panel seal.


Hide 53115B 19.REMOVE RADIATOR GRILLE BRACKET

a.
B525781C01
0,0 0,0 false
V100135

Screw
V100136

Clip (A)
V100137

Clip (B)


Remove the 2 screws.


b.

Remove the 4 clips (A).


c.

Remove the 2 clips (B) and detach the guide.


d.
B525782C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 8 screws.


e.

Detach the claw and remove the radiator grille bracket.


Hide 53124B 20.REMOVE RADIATOR GRILLE SIDE MOULDING LH

a.
B522106C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and remove the radiator grille side moulding LH.


Hide 53123B 21.REMOVE RADIATOR GRILLE SIDE MOULDING RH

HINT:

Use the same procedure as for the LH side.


Hide 52128B 22.REMOVE FRONT BUMPER HOLE COVER LH

a.

w/ Fog Light:

i.
B522107C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the clip.


ii.

Detach the claw and remove the front bumper hole cover LH.



b.

w/o Fog Light:

i.
B525973C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the clip.


ii.

Detach the claw and remove the front bumper hole cover LH.



Hide 52127D 23.REMOVE FRONT BUMPER HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 75311 24.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

a.
B522108C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 2 screws.


b.

Detach the claw and guide and remove the radiator grille (or front panel) emblem.


Hide 53286C 25.REMOVE FRONT BUMPER ARM HOLE COVER LH

a.
B560725C02
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw.


b.
B555210C05
0,0 0,0 false
V100135

Fall Prevention Hook


Detach the fall prevention hook and remove the front bumper arm hole cover LH.


Hide 53285J 26.REMOVE FRONT BUMPER ARM HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 52438 27.REMOVE FRONT BUMPER GUARD COVER LH

a.
B560723C02
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw.


b.
B555211C05
0,0 0,0 false
V100135

Fall Prevention Hook


Detach the fall prevention hook and remove the front bumper guard cover LH.


Hide 52437 28.REMOVE FRONT BUMPER GUARD COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 52411 29.REMOVE FRONT BUMPER GUARD

a.
B522116

Remove the 6 outside moulding retainers.


b.

Remove the 2 screws.


c.

Detach the claw and guide to remove the front bumper guard as shown in the illustration.

B522117C02
0,0 0,0 false
V113147

Remove in this Direction - -



Hide 52711 30.REMOVE FRONT BUMPER MOULDING (for Separate Type)

a.
B526134

Remove the 2 screws.


b.
B526133C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and remove the front bumper moulding as shown in the illustration.


Hide 53113E 31.REMOVE LOWER NO. 2 RADIATOR GRILLE

a.
B525551

Remove the 2 screws.


b.
B522118C04
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and remove the lower No. 2 radiator grille as shown in the illustration.


Hide 53112A 32.REMOVE LOWER RADIATOR GRILLE