Cruise Control System
Symptom
| Suspected Area
| See page
|
Vehicle speed cannot be set. (The CRUISE main indicator light comes on.)
| Cruise control switch circuit
|
Click here
|
Combination meter
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
Stop light switch circuit
|
Click here
|
Transmission range sensor circuit (for A750F)
|
Click here
|
Transmission range sensor circuit (for A750E)
|
Click here
|
Transmission range sensor circuit (for AB60F)
|
Click here
|
Transmission range sensor circuit (for AB60E)
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed cannot be set.)
| Stop light switch circuit
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
Cruise control switch circuit
|
Click here
|
Transmission range sensor circuit (for A750F)
|
Click here
|
Transmission range sensor circuit (for A750E)
|
Click here
|
Transmission range sensor circuit (for AB60F)
|
Click here
|
Transmission range sensor circuit (for AB60E)
|
Click here
|
Combination meter
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed can be set.)
| Cruise main indicator light circuit
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
The cruise control is canceled while it is operating.
| Stop light switch circuit
|
Click here
|
Transmission range sensor circuit (for A750F)
|
Click here
|
Transmission range sensor circuit (for A750E)
|
Click here
|
Transmission range sensor circuit (for AB60F)
|
Click here
|
Transmission range sensor circuit (for AB60E)
|
Click here
|
Cruise control switch circuit
|
Click here
|
Vehicle speed sensor circuit
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light remains on.)
| Cruise control switch circuit
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light goes off.)
| ECM
|
Click here
|
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light remains on.)
| Vehicle speed sensor circuit
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light goes off.)
| ECM
|
Click here
|
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light remains on.)
| Stop light switch circuit
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light goes off.)
| ECM
|
Click here
|
Moving the shift lever does not cancel the cruise control.
| Transmission range sensor circuit (for A750F)
|
Click here
|
Transmission range sensor circuit (for A750E)
|
Click here
|
Transmission range sensor circuit (for AB60F)
|
Click here
|
Transmission range sensor circuit (for AB60E)
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
Hunting (Speed is not constant.)
| Vehicle speed sensor circuit
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|
The CRUISE main indicator light remains blinking.
| TC and CG terminal circuit
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 2UZ-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FE).
|
Click here
|
If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM (for 3UR-FBE).
|
Click here
|