REAR LOWER ARM (for No. 2 Arm) > INSTALLATION |
| 1. TEMPORARILY INSTALL NO. 2 REAR SUSPENSION ARM ASSEMBLY LH |
![]() |
Align the matchmarks on the No. 2 rear suspension arm and adjust cam.
Temporarily install the No. 2 rear suspension arm with the bolt and nut.
![]() |
Install the No. 2 rear suspension arm to the rear axle with a new nut.
Install a new cotter pin.
| 2. INSTALL REAR COIL SPRING LH |
| 3. INSTALL REAR PNEUMATIC CYLINDER ASSEMBLY LH (w/ Air Suspension) |
| 4. STABILIZE SUSPENSION |
Lower the vehicle.
Press down on the vehicle several times to stabilize the suspension.
| 5. TIGHTEN NO. 2 REAR SUSPENSION ARM ASSEMBLY LH |
Tighten the bolt and nut.
| 6. INSPECT AND ADJUST REAR WHEEL ALIGNMENT |