Home › General › MAINTENANCE › BRAKE
RM27L0U _V1 General _049292 MAINTENANCE _0235513 BRAKE N

MAINTENANCE  BRAKE  GENERAL MAINTENANCE  


PROCEDURE

Hide 1.INSPECT BRAKE PEDAL AND PARKING BRAKE (Except North America)

a.

Inspect the brake pedal and parking brake.

Type See procedures
Brake pedal See page (Click here)
Parking brake See page (Click here)


Hide 2.INSPECT BRAKE LINE PIPES AND HOSES

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


a.
P009958

Using a mirror, check the entire circumference and length of the brake lines and hoses for:

·

Damage

·

Wear

·

Deformation

·

Cracks

·

Corrosion

·

Leaks

·

Bends

·

Twists



b.

Check all the clamps for tightness and the connections for leakage.


c.

Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.


d.

Check that the lines are installed properly and pass through the center of the grommets.


Hide 3.INSPECT BRAKE LININGS AND DRUMS, PADS AND DISCS

a.

Check the brake linings and drums of the parking brake (See page Brake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>INSPECTION).


b.

Check the brake pads and discs.

Type See procedures
Front See page (Click here)
Rear See page (Click here)

HINT:
·
S002432


·

If a squealing or scraping noise is heard from the brake while driving, check the pad wear indicator.

·

If there are traces of the indicator contacting the disc rotor, the disc pad should be replaced.




Hide 4.INSPECT BRAKE FLUID

a.

Hide 5.REPLACE BRAKE FLUID

a.

Replace the brake fluid (See page Brake>BRAKE SYSTEM (OTHER)>BRAKE FLUID>REPLACEMENT).