Home › Engine / Hybrid System › 3UR-FE ENGINE MECHANICAL › DRIVE BELT
RM27L0U _51 Engine / Hybrid System _049296 3UR-FE ENGINE MECHANICAL _0235560 DRIVE BELT A

3UR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 16361A 3.REMOVE FAN AND GENERATOR V BELT

a.
A163770E07
1.75,2.073 1.979,1.99 false 2.021,1.896 2.313,2.104 0.292,0.208 10 true Bar

While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of φ 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.

HINT:

The pulley bolt for the belt tensioner has a left-hand thread.



b.

Remove the fan and generator V belt.