16031
1.INSTALL INLET WATER SUB-ASSEMBLY WITH THERMOSTAT
Install a new gasket and the water inlet with thermostat with the 3 nuts.
16281F
2.CONNECT NO. 5 WATER BY-PASS HOSE
Connect the No. 5 water by-pass hose.
Install the hose so that the direction of the hose clamp is as indicated in the illustration.
16572
3.CONNECT OUTLET RADIATOR HOSE
17303
4.INSTALL AIR PIPE SUB-ASSEMBLY
Install the air pipe with the bolt.
Connect the connector and install the wire harness with the 2 clamps.
17342
5.CONNECT NO. 2 AIR INJECTION SYSTEM HOSE
Connect the No. 2 air injection hose.
Attach the wire harness clamp.
Connect the air pump connector.
17343
6.CONNECT NO. 3 AIR INJECTION SYSTEM HOSE
Connect the No. 3 air injection hose.
7.ADD ENGINE COOLANT
8.INSPECT FOR COOLANT LEAK
11209
9.INSTALL V-BANK COVER SUB-ASSEMBLY
51441
10.INSTALL NO. 1 ENGINE UNDER COVER