15788
1.INSTALL OIL COOLER SPACER
Apply a light coat of engine oil to a new gasket.
Install the gasket to the oil cooler spacer.
Install the oil cooler spacer to the oil filter bracket with the bolt.
15710
2.INSTALL OIL COOLER ASSEMBLY
Apply a light coat of engine oil to 2 new O-rings.
Install the 2 O-rings to the oil cooler.
Install the oil cooler with the 5 nuts.
15671
3.INSTALL OIL FILTER BRACKET
Apply a light coat of engine oil to 2 new O-rings.
Install the 2 O-rings to the timing chain cover.
Install the oil filter bracket with the 2 nuts and 2 bolts.
15781
4.INSTALL NO. 1 OIL COOLER BRACKET
Connect the ground wire to the cylinder block.
Install the oil cooler bracket with the 2 nuts.
16268A
5.INSTALL WATER BY-PASS PIPE HOSE
Connect the 4 hoses.
Install the water by-pass hose with the 3 bolts.
88320
6.INSTALL COOLER COMPRESSOR ASSEMBLY
83520
7.INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY
04152
8.INSTALL OIL FILTER ELEMENT
Install the oil filter element (See page Engine / Hybrid System>3UR-FE LUBRICATION>OIL AND OIL FILTER>REPLACEMENT).
16361A
9.INSTALL FAN & GENERATOR V BELT
Install the fan and generator V belt (See page Engine / Hybrid System>3UR-FE ENGINE MECHANICAL>DRIVE BELT>INSTALLATION).
10.ADD ENGINE OIL
11.ADD ENGINE COOLANT
12.INSPECT FOR OIL LEAK
13.CHECK ENGINE OIL LEVEL
14.INSPECT FOR COOLANT LEAK