This DTC is output when the VSC system has a problem. Check the VSC system when this DTC is output.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P1578 | The ECM receives a brake system error signal for 0.2 seconds or more while the dynamic laser cruise control is in operation | ·
VSC system ·
ECM |
This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.
Check for DTCs in Vehicle Stability Control System (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is output | A |
| DTC is not output (for 3UR-FE) | B |
| DTC is not output (for 3UR-FBE) | C |
A
(See pageBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR)
B
C