Home › Suspension › SUSPENSION CONTROL › HEIGHT CONTROL COMPRESSOR
RM27L0U _53 Suspension _049315 SUSPENSION CONTROL _0235705 HEIGHT CONTROL COMPRESSOR A

SUSPENSION CONTROL  HEIGHT CONTROL COMPRESSOR  INSTALLATION  


PROCEDURE

Hide 48911 1.INSTALL HEIGHT CONTROL COMPRESSOR BRACKET

C180594

a.

Install the height control compressor bracket with the 3 bolts.

Torque:
5.9 N*m (60 kgf*cm, 52 in.*lbf)


b.
C180591

Connect the wire harness clamps.


Hide 48925 2.INSTALL HEIGHT CONTROL FILTER

C180590

a.

Install the height control filter with the 2 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)


b.

Connect the 2 hoses.


Hide 48914A 3.INSTALL HEIGHT CONTROL NO. 1 COMPRESSOR

C180602

a.

Install the height control compressor with the 3 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


b.

Connect the height control tube (See page Suspension>SUSPENSION CONTROL>SUSPENSION CONTROL SYSTEM>PRECAUTION).


c.

Connect the 2 wire harness connectors.


d.

Connect the hoses with 4 new clips.


e.

Install the compressor cover with 3 new clips.


Hide 52159 4.INSTALL REAR BUMPER COVER