Home › Brake › PARKING BRAKE › PARKING BRAKE PEDAL
RM27L0U _54 Brake _049325 PARKING BRAKE _0235755 PARKING BRAKE PEDAL A

PARKING BRAKE  PARKING BRAKE PEDAL  REMOVAL  


PROCEDURE

Hide 1.RELEASE PARKING BRAKE PEDAL

Hide 67914 2.REMOVE FRONT DOOR SCUFF PLATE LH

Hide 53601 5.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Hide 55046A 6.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

Hide 73900 7.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 46410 8.DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY

a.
C154230

Remove the lock nut and adjustment nut.


b.
C154232

Remove the clip.


c.
C155437

Using a screwdriver, slowly bend up the claw.

NOTICE:

Be careful not to damage the No. 1 parking brake cable or claw.



d.

Disconnect the parking brake cable from the parking brake control pedal.


Hide 46200 9.REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

a.
C181289

Disconnect the connector.


b.

Detach the wire harness clamp from the control pedal.


c.
C154234

Remove the 3 nuts and parking brake control pedal from the body.