Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM27L0U _55 Steering _049326 POWER ASSIST SYSTEMS _0235759 POWER STEERING SYSTEM C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  C1544  High Engine Revolution Signal  


DESCRIPTION

The power steering ECU receives engine speed signals from the ECM via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the engine speed signal.

DTC No. DTC Detection Condition Trouble Area
C1544 An abnormal engine speed signal is received.
·

SFI system

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)

A

2.CHECK OTHER DTC OUTPUT (SFI SYSTEM)

B

REPAIR CIRCUIT INDICATED BY OUTPUTCODE

2.CHECK OTHER DTC OUTPUT (SFI SYSTEM)
a.

Using the Techstream, check for DTCs and confirm that there are no problems in the SFI system (See page Engine / Hybrid System>3UR-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR for 3UR-FE, Engine / Hybrid System>3UR-FBE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR for 3UR-FBE).

Result
Result Proceed to
DTC is not output A
DTC is output (for 3UR-FE) B
DTC is output (for 3UR-FBE) C



A

REPLACE POWER STEERING ECU ASSEMBLY

B

C