Home › Steering › STEERING GEAR / LINKAGE › STEERING GEAR
RM27L0U _55 Steering _049328 STEERING GEAR / LINKAGE _0235768 STEERING GEAR A

STEERING GEAR / LINKAGE  STEERING GEAR  REMOVAL  


PROCEDURE

Hide 1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Hide 2.REMOVE FRONT WHEELS

Hide 3.REMOVE ENGINE ASSEMBLY

a.

for 3UR-FE:

Remove engine assembly (See page Engine / Hybrid System>3UR-FE ENGINE MECHANICAL>ENGINE ASSEMBLY>REMOVAL).


b.

for 3UR-FBE:

Remove engine assembly (See page Engine / Hybrid System>3UR-FBE ENGINE MECHANICAL>ENGINE ASSEMBLY>REMOVAL).


Hide 45203 4.DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY

C155151E05
0.99,1.469 1.646,1.344 false 0.99,1.469 1.677,1.563 false 0.219,1.385 0.969,1.552 0.75,0.167 10 true Matchmark

a.

Put matchmarks on the No. 2 steering intermediate shaft and the power steering gear.


b.

Remove the bolt and disconnect the No. 2 steering intermediate shaft from the power steering gear.


Hide 45047 5.DISCONNECT TIE ROD END SUB-ASSEMBLY LH

a.

Remove the cotter pin and nut.


b.
C179622E01
0.327,2.312 0.712,2.561 0.385,0.248 10 SST 0.686,2.403 1.107,2.403 false 1.107,2.403 1.841,1.67 false

Using SST, disconnect the tie rod end LH from the steering knuckle.

SST
09610-20012  

NOTICE:
·

Hang SST with a string, etc. to prevent it from falling.

·

Do not damage the front disc brake dust cover.

·

Do not damage the ball joint dust cover.

·

Do not damage the steering knuckle.




Hide 45046 6.DISCONNECT TIE ROD END SUB-ASSEMBLY RH

HINT:

Use the same procedures described for the LH side.


Hide 44410 7.DISCONNECT PRESSURE FEED TUBE ASSEMBLY

a.
C181253

Using a union nut wrench, disconnect the pressure feed tube (return tube side) from the power steering gear.


b.
C181254

Using a union nut wrench, disconnect the pressure feed tube (pressure feed tube side) from the power steering gear.


c.
C181255

Remove the 2 bolts and disconnect the pressure feed tube clamp.


Hide 44250 8.REMOVE POWER STEERING GEAR ASSEMBLY

C353499E01
0.188,0.115 1.656,0.354 1.469,0.24 12 true for 2WD: 3.74,0.115 4.438,0.427 0.698,0.313 12 true for 4WD:

a.

Remove the 2 bolts, 2 nuts and power steering gear.