Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER
RM27L0U _56 Audio / Visual / Telematics _049329 AUDIO / VIDEO _0235779 STEREO COMPONENT AMPLIFIER A

AUDIO / VIDEO  STEREO COMPONENT AMPLIFIER  INSTALLATION  


PROCEDURE

Hide 86280 1.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY

a.
B190161

Install the amplifier with the 3 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


b.

Connect the 4 connectors.


Hide 86183D 2.INSTALL AUDIO AMPLIFIER COVER

B190162

a.

Set the cover on the stereo amplifier assembly.


b.

Engage the 3 clips.


Hide 3.INSTALL FRONT SEAT ASSEMBLY RH

a.

for Manual Seat:

Install the front seat RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION).


b.

for Power Seat:

Install the front seat RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION).


Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)