Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER
RM27L0U _56 Audio / Visual / Telematics _049329 AUDIO / VIDEO _0235779 STEREO COMPONENT AMPLIFIER A

AUDIO / VIDEO  STEREO COMPONENT AMPLIFIER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION ).


Hide 3.REMOVE FRONT SEAT ASSEMBLY RH

a.

for Manual Seat:

Remove the front seat RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL).


b.

for Power Seat:

Remove the front seat RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL).


Hide 86183D 4.REMOVE AUDIO AMPLIFIER COVER

B190162

a.

Disengage the 3 clips and remove the cover.


Hide 86280 5.REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY

B190161

a.

Disconnect the 4 connectors.


b.

Remove the 3 bolts and amplifier.