Display the "Display" screen.
Turn the headlight dimmer switch assembly to the tail or head position.
Check if "Day Mode" on the display adjustment screen is on.
"Day Mode" setting is off
OK
NG
Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>OPERATION CHECK)]
Check that the display for "TAIL" changes between ON and OFF according to the headlight dimmer switch assembly operation.
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
| Headlight Dimmer Switch Assembly | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
OK
NG