Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM27L0U _56 Audio / Visual / Telematics _049329 AUDIO / VIDEO _0235782 AUDIO AND VISUAL SYSTEM T

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  PROBLEM SYMPTOMS TABLE  


NOTICE:

After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Display Function
Symptom Suspected Area See page
Pressing power switch does not turn on system Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Black screen (No image appears on audio screen) Proceed to "Black Screen" (Click here)
Radio and display receiver assembly (Click here)
Display does not dim (does not change to night screen) with tail switch on Proceed to "Display does not Dim when Light Control Switch is Turned ON" (Click here)
Proceed to "Illumination Circuit" (Click here)
Radio and display receiver assembly (Click here)
Power does not turn off (Screen remains on) Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Screen is distorted Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Screen flicker or color distortion Proceed to "Screen Flicker or Color Distortion" (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Audio function switches can be operated while vehicle being driven Proceed to "Parking Brake Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)

Panel Switch and Touch Switch Function
Symptom Suspected Area See page
Illumination for panel switches does not come on with tail switch on Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON" (Click here)
Proceed to "Illumination Circuit" (Click here)
Radio and display receiver assembly (Click here)
Panel switches do not function Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Touch panel switch does not function Proceed to "Touch Panel Switch does not Function" (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Audio function switches can be operated while vehicle is driving Proceed to "Parking Brake Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)

Steering Pad Switch Function (w/ Steering Pad Switch)
Symptom Suspected Area See page
System cannot be operated by steering pad switch Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Steering Pad Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)
Illumination for steering pad switch does not come on with tail switch on Proceed to "Illumination Circuit" (Click here)
Radio and display receiver assembly (Click here)

General Audio Function
Symptom Suspected Area See page
No sound can be heard from speakers Proceed to "No Sound can be Heard from Speakers" (Click here)
Proceed to "Speaker circuit" (Click here)
Radio and display receiver assembly (Click here)
Abnormal noise occurs Proceed to "Noise Occurs" (Click here)
Radio and display receiver assembly (Click here)
Sound quality is bad in all modes. (Volume is too low) Check that the ASL function is off. -
Proceed to "Poor Sound Quality in All Modes (Low Volume)" (Click here)
Proceed to "Speaker circuit" (Click here)
Radio and display receiver assembly (Click here)
ASL does not function Check that the ASL function is on. -
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter" (Click here)
Radio and display receiver assembly (Click here)

FM or AM Radio Function
Symptom Suspected Area See page
Radio broadcast cannot be received or poor reception Proceed to "Radio Broadcast cannot be Received or Poor Reception" (Click here)
Radio broadcast can be received but radio station cannot be displayed (Some radio stations do not provide their name information) Radio and display receiver assembly (Click here)
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers Check the volume settings -
Radio and display receiver assembly (Click here)
Radio broadcast can be received but station list cannot be displayed Wait for 120 seconds in radio mode, and select the "Refresh" switch on the station list screen -
Radio and display receiver assembly (Click here)
Radio broadcast can be received but station list cannot be displayed Select the "Refresh" switch on the station list screen -
Wait for 10 minutes with the ignition switch ACC, and select the "Refresh" switch on the station list screen again -
Radio and display receiver assembly (Click here)
After the voice recognition function or hands-free function is turned off, the cache radio does not operate Check that the cache radio setting is on -
Radio and display receiver assembly (Click here)

HD Radio Function (w/ HD Radio Function)
Symptom Suspected Area See page
Only "HD Radio" stations cannot be heard or selected, or their analog or digital sound cannot be changed Check the "HD Radio" settings -
Radio and display receiver assembly (Click here)
"iPod" tagging function cannot be used Check if a message indicating that the capacity for tag information is full is displayed -
Check that the cache radio is not playing (when the cache radio is playing, "iPod" tagging function cannot be used) -
Proceed to "USB Audio System Recognition/ Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
When the HD radio is playing, cover art may not be displayed When a song unregistered to the Gracenote CDDB is playing or cover art information is not provided by the broadcast station, its cover art cannot be displayed -
When the HD radio is playing, cover art cannot be displayed Radio and display receiver assembly (Click here)
Broadcast station logo cannot be displayed Check if similar symptoms occur when receiving other broadcasts -
Check if similar symptoms occur with another vehicle -
Radio and display receiver assembly (Click here)
SPS channel cannot be selected Check that HD radio FM mode is selected -
After pressing the "Refresh" switch, check that the SPS channel is on the station list -
Radio and display receiver assembly (Click here)
When the SPS channel is selected, sound cannot be heard After pressing the "Refresh" switch, select the SPS channel on the station list -
Radio and display receiver assembly (Click here)

SDARS System Function (w/ SDARS System)
Symptom Suspected Area See page
Satellite radio broadcast cannot be received or reception is bad Proceed to "Satellite Radio Broadcast cannot be Received" (Click here)
Stereo component tuner assembly (Click here)
Radio and display receiver assembly (Click here)
Satellite radio cannot receive pay-type broadcasts Proceed to "Satellite Radio Broadcast cannot be Received" (Click here)
Stereo component tuner assembly (Click here)
Radio and display receiver assembly (Click here)
Satellite radio broadcast cannot be selected or after selecting broadcast, broadcast cannot be added into memory Proceed to "Satellite Radio Broadcast cannot be Received" (Click here)
Proceed to "Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory" (Click here)
Stereo component tuner assembly (Click here)
Radio and display receiver assembly (Click here)
Satellite radio can be displayed but radio broadcast cannot be heard from speakers Check the volume settings -
Proceed to "Satellite Radio Broadcast cannot be Received" (Click here)
Stereo component tuner assembly (Click here)
Radio and display receiver assembly (Click here)
Broadcast station logo cannot be displayed Proceed to "Satellite Radio Broadcast cannot be Received" (Click here)
Proceed to "Data Signal Circuit between Radio Receiver and Extension Module" (Click here)
Stereo component tuner assembly (Click here)
Radio and display receiver assembly (Click here)
Satellite radio text information cannot be displayed Proceed to "Satellite Radio Broadcast cannot be Received" (Click here)
Stereo component tuner assembly (Click here)
Radio and display receiver assembly (Click here)
Satellite radio broadcast station cannot be selected (scan cannot be performed) Proceed to "Satellite Radio Broadcast cannot be Received" (Click here)
Stereo component tuner assembly (Click here)
Radio and display receiver assembly (Click here)
When the satellite radio is playing, some cover art may not be displayed When a song unregistered to the Gracenote CDDB is playing, its cover art cannot be displayed -
When the satellite radio is playing, cover art cannot be displayed Radio and display receiver assembly (Click here)

CD Player Function
Symptom Suspected Area See page
CD cannot be played or player does not function with CD Proceed to "CD Player Outline" in System Description and check if the CD is compatible with the CD player (Click here)
Radio and display receiver assembly (Click here)
CD cannot be inserted/played or CD is ejected right after insertion Proceed to "CD cannot be Inserted or is Ejected Right After Insertion" (Click here)
CD cannot be ejected Proceed to "CD cannot be Ejected" (Click here)
CD sound skips Proceed to "CD Sound Skips" (Click here)
While vehicle is stopped, DVD cannot be viewed even when parking brake is set (parking brake switch is on) Proceed to "Parking Brake Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)
Screen color is poor only when watching a DVD Change the color settings on the screen adjustment screen -
Radio and display receiver assembly (Click here)
Sound quality is bad only when CD is played (volume is too low) Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" (Click here)
When CD is playing, some cover art is not displayed When a song unregistered to the Gracenote CDDB is playing, its cover art cannot be displayed -
When CD is playing, cover art cannot be displayed Radio and display receiver assembly (Click here)
Album cover art cannot be displayed Check that Display Cover Art on the CD settings screen is set to on -
Check if similar symptoms occur with another vehicle -
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the Radio and display receiver assembly, update the Gracenote database to the latest version. -
Radio and display receiver assembly (Click here)

AUX (Stereo Jack) Function
Symptom Suspected Area See page
External device sound cannot be heard or sound quality is bad (Stereo jack is used) Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
"AUX/VTR" is not displayed on system check mode screen Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)

Voice Recognition Function
Symptom Suspected Area See page
Voice menu screen is not displayed (Voice recognition function does not turn on) Check if the voice recognition prompts function is "On" -
Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Steering Pad Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)
When voice recognition switch is pressed, a short beep is emitted but voice cannot be recognized properly Proceed to "Voice is not Recognized" (Click here)
Proceed to "Microphone Circuit between Microphone and Radio Receiver" (Click here)
Radio and display receiver assembly (Click here)

"Bluetooth" Hands-free Function
Symptom Suspected Area See page
"Bluetooth" is inoperative (In-vehicle device cannot be recognized by the cellular phone) Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
"Bluetooth" compatible cellular phone cannot be registered Proceed to "Cellular Phone Registration Failure" (Click here)
"Bluetooth" compatible cellular phone cannot be connected Check that no other cellular phone is connected as a hands-free device -
Bring the cellular phone near the in-vehicle device and reconnect it -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually) Check that "Bluetooth" automatic connection setting of the in-vehicle device is on -
Radio and display receiver assembly (Click here)
"Bluetooth" compatible cellular phone connection is disconnected Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
Message that prompts to check the cellular phone is displayed Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed Turn the cellular phone connection conformation display on the in-vehicle device off -
Phonebook data cannot be transferred Check that the phonebook automatic transfer setting of the in-vehicle device is on -
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required) -
Check that no applications on the cellular phone are running -
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation -
Transfer phonebook data manually -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
Phonebook data is cleared Radio and display receiver assembly (Click here)
Phonebook data cannot be edited Check that the phonebook data automatic transfer setting is off -
Radio and display receiver assembly (Click here)
All the transferred phonebook data is sorted to "Other" Check that no applications on the cellular phone are operating -
Check that phonebook data in the cellular phone is not stored to the SIM card -
Proceed to "Cellular Phone Inspection" (Click here)
Explain to the customer that all the transferred phonebook data may be stored to "Other" depending on cellular phone -
Cellular phone cannot make outgoing/ incoming calls Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again -
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth" -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
Other caller's voice is interrupted by noise or sound quality is poor Check the receiving voice volume (if it is too high, voice may sound distorted) -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check (Click here)
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
Other caller's voice cannot be heard Check that reception voice volume is not set to minimum -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check (Click here)
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
Caller's voice (your voice) is interrupted by noise or sound quality is poor Check the transmitting voice volume (if it is too high, voice may sound distorted) -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check (Click here)
Proceed to "Cellular Phone Inspection" (Click here)
Proceed to "Microphone Circuit between Microphone and Radio Receiver" (Click here)
Other caller cannot hear your voice When talking on the cellular phone, check that the mute button is not pressed -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check (Click here)
Proceed to "Cellular Phone Inspection" (Click here)
Proceed to "Microphone Circuit between Microphone and Radio Receiver" (Click here)
No notification when a new SMS/MMS/e-mail has been received Check the SMS/MMS/e-mail notification settings on the cellular phone and the Radio and display receiver assembly -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
Received SMS/MMS/e-mail cannot be read Check the SMS/MMS/e-mail transfer settings on the cellular phone and the Radio and display receiver assembly -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)
SMS/MMS/e-mail cannot be replied to Move the vehicle into a cellular phone service area, and check the operation of the Radio and display receiver assembly and cellular phone -
Check that the cellular phone can send an SMS/MMS/e-mail -
Proceed to "Cellular Phone Inspection" (Click here)
Radio and display receiver assembly (Click here)

"Bluetooth" Audio Function
Symptom Suspected Area See page
Portable player cannot be registered Proceed to "Portable Player cannot be Registered" (Click here)
Radio and display receiver assembly (Click here)
Portable player cannot be connected manually/automatically Proceed to "Portable Player cannot be Registered" (Click here)
Proceed to "Portable Player cannot be Connected Manually/Automatically" (Click here)
Radio and display receiver assembly (Click here)
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth" Proceed to "Portable Player cannot be Registered" (Click here)
Proceed to "Portable Player cannot be Connected Manually/Automatically" (Click here)
Radio and display receiver assembly (Click here)
Sound of portable player cannot be heard from speakers, or sound is low Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low" (Click here)
Radio and display receiver assembly (Click here)
Portable player does not play even after "Bluetooth" audio mode is selected Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" (Click here)
Radio and display receiver assembly (Click here)
Portable player does not play Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" (Click here)
Radio and display receiver assembly (Click here)
Track information such as track number, track name, elapsed play time and playlist is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Battery condition of portable player is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
"Bluetooth" signal condition is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Noise occurs or sound skips when portable player plays Proceed to "Noise Occurs or Sound Skips when Portable Player Plays" (Click here)
Radio and display receiver assembly (Click here)
Registered device cannot be deleted Proceed to "Registered Device cannot be Deleted" (Click here)
Radio and display receiver assembly (Click here)

USB Audio System Function
Symptom Suspected Area See page
USB audio system sound cannot be heard or sound quality is bad (USB connector is used) Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
USB device or "iPod" is not recognized Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Track information such as track, artist and album names is not displayed Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
USB device or "iPod" is recognized but cannot play, or can play but not in a sorted order Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Album cover art cannot be displayed Check that Display Cover Art on the "iPod" or USB Settings screen is set to -
Check if similar symptoms occur with another vehicle -
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the Radio and display receiver assembly, update the Gracenote database to the latest version. -
Radio and display receiver assembly (Click here)
User set album cover art cannot be displayed Check if the priority display of Gracenote database album cover art setting is off -
Check that a JPEG file is used for the album cover art registered to the music data in the USB device or "iPod" - Radio and display receiver assembly -
Radio and display receiver assembly (Click here)
"iPod" battery cannot be charged Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)

Customize Startup Image or Screen Off Image Function
Symptom Suspected Area See page
Screen cannot be changed to UIC setting screen Radio and display receiver assembly (Click here)
Thumbnails for opening image setting or screen off image setting do not update when USB device is connected Check that the USB device was not disconnected while transferring an image -
Check that the screen was not changed to another function menu while transferring an image -
Proceed to "USB Audio System Recognition/ Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Transfer button cannot be pressed Check that a USB device is connected -
Check that the USB device is not in use (USB audio system is playing etc.) -
Proceed to "USB Audio System Recognition/ Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Image data in USB device cannot be displayed Check that the designated folder name is used -
Check that the file extension of the data is JPG or JPEG -
Check that the file name is 32 characters or less and available language is used -
Check that the image data size is 10 MB or less -
Check that the file system of the USB device is FAT16 or FAT32 -
Proceed to "USB Audio System Recognition/ Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Set opening image or screen off image is not displayed Check if it is the first start-up after disconnecting and reconnecting the +B terminal (reading from the SD card may be slow when the system is first starting-up) -
Set the opening image or screen off image again -
Radio and display receiver assembly (Click here)
Stored image cannot be deleted Radio and display receiver assembly (Click here)
Message indicating that USB device cannot be accessed is displayed Check that the USB device has not been disconnected while the audio and visual system is recognizing it -
Proceed to "USB Audio System Recognition/ Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Thumbnail images for opening image or screen off image are not displayed on setting screen Check if it is the first start-up after disconnecting and reconnecting the +B terminal (reading from the SD card may be slow when the system is first starting-up) -
Set the opening image or screen off image again -
Radio and display receiver assembly (Click here)
Image cannot be set for opening image or screen off image on setting screen Set the opening image or screen off image again -
Radio and display receiver assembly (Click here)

Mobile Assistant Function
Symptom Suspected Area See page
Mobile Assistant function does not work Confirm the Siri speech recognition application can be used on the device -
Confirm a hard reset of the device does not correct the problem -
Proceed to "Steering Pad Switch Circuit" (Click here)
Proceed to "Voice is not Recognized" (Click here)
Proceed to "Microphone Circuit between Microphone and Radio Receiver" (Click here)
Radio and display receiver assembly (Click here)

Connected Navigation Function
Symptom Suspected Area See page
A Connected Navigation system error message is displayed on the screen Follow on screen instructions -
Proceed to "Confirm Cellular Phone Functionality" (Click here)
Proceed to "Confirm Vehicle Headunit Functionality" (Click here)
Proceed to "Connected Navigation Reset Procedure" in Operation Check (Click here)
Radio and display receiver assembly (Click here)
Connected Navigation apps and services are not operating as expected Proceed to "Confirm Cellular Phone Functionality" (Click here)
Proceed to "Confirm Vehicle Headunit Functionality" (Click here)
Proceed to "Connected Navigation Reset Procedure" in Operation Check (Click here)
Radio and display receiver assembly (Click here)
Poor sound quality of Connected Navigation system Confirm that Voice Setup is turned up -
Confirm that cellular phone handset volume is turned up -
Confirm that adequate signal is maintained during driving -
Proceed to "Confirm Cellular Phone Functionality" (Click here)
Proceed to "Confirm Vehicle Headunit Functionality" (Click here)
Proceed to "Connected Navigation Reset Procedure" in Operation Check (Click here)
Radio and display receiver assembly (Click here)