89341B
1.INSTALL NO. 2 ULTRASONIC SENSOR
Attach the 4 claws to install the No. 2 ultrasonic sensor as shown in the illustration.
No. 2 ultrasonic sensor direction is the same as the keyhole direction.
Do not damage the bumper with the protrusion when installing the No. 2 ultrasonic sensor.
| *a | No. 2 ultrasonic sensor direction | *b | Keyhole direction |
52159
2.INSTALL REAR BUMPER COVER
76626E
3.INSTALL REAR QUARTER PANEL MUDGUARD LH
76625G
4.INSTALL REAR QUARTER PANEL MUDGUARD RH
Use the same procedure as for the LH side.