84977
1.INSTALL DRIVE MONITOR SWITCH
Attach the 2 claws to install the drive monitor switch.
55410C
2.INSTALL INSTRUMENT CLUSTER FINISH PANEL
55046A
3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
55318C
4.INSTALL INSTRUMENT SIDE PANEL LH
Attach the 7 claws to install the side panel.
62112
5.INSTALL COWL SIDE TRIM BOARD LH
Attach the 2 clips to install the cowl side trim board.
Install the clip.
67914B
6.INSTALL FRONT DOOR SCUFF PLATE LH
Attach the 9 claws to install the front door scuff plate.