Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD
RM27L0U _58 Vehicle Interior _049346 INTERIOR PANELS / TRIM _0235938 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  INSTALLATION  


PROCEDURE

Hide 55328 1.INSTALL NO. 1 INSTRUMENT PANEL PIN

a.

Install the 2 instrument panel pins with the 2 <G> or <H> screws.


Hide 89120 2.INSTALL AUTOMATIC LIGHT CONTROL SENSOR

B192361

a.

Attach the 2 claws to install the automatic light control sensor.


Hide 82142 4.INSTALL NO. 2 INSTRUMENT PANEL WIRE

a.

Attach the wire harness clamps to install the instrument panel wire.


b.

Connect the 2 connectors.


Hide 86860 5.INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

Hide 83290D 6.INSTALL ACCESSORY METER ASSEMBLY

a.

Install the accessory meter with the 3 screws.


Hide 55670 7.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Install the register with the 3 <G> or <H> screws.


Hide 55680A 8.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Install the register with the 3 <G> or <H> screws.


Hide 55950G 9.INSTALL DEFROSTER NOZZLE ASSEMBLY

a.

Install the defroster nozzle with the 3 <G> or <H> screws.


Hide 55972C 10.INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.

Attach the 2 claws to install the duct.


b.

Install the 2 <G> or <H> screws.


Hide 55971C 11.INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.

Attach the 2 claws to install the duct.


b.

Install the 2 <G> or <H> screws.


Hide 55843A 12.INSTALL NO. 1 HEATER TO REGISTER DUCT

a.

Install the duct with the 5 <G> or <H> screws.


b.

Attach the clamp.


Hide 55345A 13.INSTALL NO. 1 INSTRUMENT PANEL CLIP

a.

Attach the 2 claws to install the 2 clips.


Hide 55328A 14.INSTALL NO. 3 INSTRUMENT PANEL STAY

a.

Attach the 3 claws to install the 3 stays.


Hide 55301 15.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 8 Speakers)

a.

Attach the 5 claws to install the instrument panel.


b.

Install the 3 <C> bolts and 2 <E> nuts.


c.

Install the 2 <F> passenger airbag bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


d.

Connect the connectors and attach the wire harness clamps.


e.

Install the wire harness with the bolt.

Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)


f.
B325773E01
2.834,4.103 3.243,4.246 0.408,0.143 10 *1(*a) 2.642,3.96 2.738,4.179 2.738,4.179 2.826,4.179 false 2.044,0.948 2.429,1.091 0.386,0.143 10 *1(*a) 2.683,0.594 2.587,1.034 2.587,1.034 2.499,1.034 false

Connect the 2 airbag connectors.


g.

Check that the slider is in the lock position.

Text in Illustration
*1 Slider
*a Lock Position


Hide 55301 16.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 14 Speakers)

a.

Attach the 5 claws to install the instrument panel.


b.

Install the 3 <C> bolts and 2 <E> nuts.


c.

Install the 2 <F> passenger airbag bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


d.

Connect the connectors and attach the wire harness clamps.


e.

Install the wire harness with the bolt.

Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)


f.
B325773E01
2.834,4.103 3.243,4.246 0.408,0.143 10 *1(*a) 2.642,3.96 2.738,4.179 2.738,4.179 2.826,4.179 false 2.044,0.948 2.429,1.091 0.386,0.143 10 *1(*a) 2.683,0.594 2.587,1.034 2.587,1.034 2.499,1.034 false

Connect the 2 airbag connectors.


g.

Check that the slider is in the lock position.

Text in Illustration
*1 Slider
*a Lock Position


Hide 87212H 17.INSTALL REAR NO. 4 AIR DUCT (for 14 Speakers)

Hide 86280 18.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY (for 14 Speakers)

Hide 86183D 19.INSTALL AUDIO AMPLIFIER COVER (for 14 Speakers)

Hide 71100S 20.INSTALL FRONT RH SEAT ASSEMBLY (for 14 Speakers)

Hide 72137G 21.INSTALL SEAT TRACK OUTER COVER RH (for 14 Speakers)

Hide 72137C 22.INSTALL SEAT TRACK INNER COVER RH (for 14 Speakers)

Hide 71910A 23.INSTALL FRONT SEAT HEADREST ASSEMBLY (for 14 Speakers)

Hide 86160L 24.INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers)

Hide 55474E 25.INSTALL NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

B192348

a.

Attach the 6 clips and 2 claws to install the speaker panel.


Hide 55409F 27.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

B192350

a.

Attach the 4 clips and claw to install the speaker panel.


Hide 55409A 29.INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

B192346

a.

Attach the 4 clips and claw to install the speaker panel.


Hide 55042B 30.INSTALL NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

a.

Attach the clip to install the box door.


b.

Install the 6 <B> or <H> screws.


Hide 55045A 31.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

a.

Connect the connector.


b.

Attach the 3 claws to install the finish panel.


c.

Install the 3 <D> screws and bolt <A>.


Hide 55312 33.INSTALL LOWER INSTRUMENT PANEL

a.

Attach the 2 claws.


b.

Install the panel with the bolt <A> and screw <D>.


Hide 55607 34.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Attach the 2 guides and 4 claws.


b.

Attach the clip to install the under cover.


Hide 55317A 35.INSTALL INSTRUMENT SIDE PANEL RH

a.
B229198

Attach the 6 claws to install the side panel.


Hide 62311B 37.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 67913B 39.INSTALL FRONT DOOR SCUFF PLATE RH

Hide 86120 40.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/o Navigation System)

Hide 86120L 41.INSTALL NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)

Hide 84010A 42.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

Hide 55434B 43.INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL

a.

Connect the connectors.


b.

Attach the 4 clips and 2 claws to install the finish panel.


Hide 55410C 45.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.

Attach the 12 clips to install the finish panel.


b.

Connect the 2 connectors and attach the wire harness clamp.


c.

Attach the 4 claws to install the instrument panel finish panel retainer.


Hide 58805C 50.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 58804A 51.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 33504F 52.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Hide 55046A 54.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

a.

Attach the 2 claws to install the sensor.


b.

Connect the connectors.


c.

Attach the 9 clips and claw to install the finish panel.


d.

Install the 2 <A> bolts.


Hide 53601 55.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Hide 55318C 56.INSTALL INSTRUMENT SIDE PANEL LH

a.
B229058

Attach the 7 claws to install the side panel.


Hide 62312B 58.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 67914B 60.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 84140 61.INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

Hide 45100 64.INSTALL STEERING WHEEL ASSEMBLY

Hide 45187 66.INSTALL LOWER NO. 3 STEERING WHEEL COVER

Hide 45186 67.INSTALL LOWER NO. 2 STEERING WHEEL COVER

Hide 68.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)