Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT AIRBAG SENSOR
RM27L0U _58 Vehicle Interior _049341 SUPPLEMENTAL RESTRAINT SYSTEMS _0235850 FRONT AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT AIRBAG SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89174A 1.INSPECT FRONT AIRBAG SENSOR (for Vehicle not Involved in Collision)

Hide 89174A 2.INSPECT FRONT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

CAUTION:

For front airbag sensor removal and installation procedures, see pages Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT AIRBAG SENSOR>INSTALLATION and Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR, and carefully follow the correct procedure.


a.

b.

When the center front bumper or its periphery is damaged, check whether there is any damage to the front airbag sensor. If there are any defects, such as those mentioned below, replace the front airbag sensor with a new one:

·

Any cracks, dents or chips in the case.

·

Any cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.



Hide 89174A 3.INSPECT FRONT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision)

CAUTION:

For front airbag sensor removal and installation procedures, see pages Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT AIRBAG SENSOR>REMOVAL and Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT AIRBAG SENSOR>INSTALLATION, and carefully follow the correct procedure.


a.

Replace the front airbag sensor.