Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › REAR AIRBAG SENSOR
RM27L0U _58 Vehicle Interior _049341 SUPPLEMENTAL RESTRAINT SYSTEMS _0235853 REAR AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  REAR AIRBAG SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89833 1.INSPECT REAR AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)

Hide 89833 2.INSPECT REAR AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

CAUTION:

For rear airbag sensor removal and installation procedures, see pages Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>REAR AIRBAG SENSOR>REMOVAL and Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>REAR AIRBAG SENSOR>INSTALLATION, and carefully follow the correct procedure.



b.

When the quarter panel of the vehicle or its periphery is damaged, check whether there is any damage to the rear airbag sensor. If there are any defects, such as those mentioned below, replace the rear airbag sensor with a new one:

·

Any cracks, dents or chips in the case.

·

Any cracks or other damage to the connector.

·

Peeling of the label or damage to the serial number.



Hide 89833 3.INSPECT REAR AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision)

CAUTION:

For rear airbag sensor removal and installation procedures, see pages Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>REAR AIRBAG SENSOR>REMOVAL and Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>REAR AIRBAG SENSOR>INSTALLATION, and carefully follow the correct procedure.


a.

Replace the rear airbag sensor.