Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for the LH side and RH side.
The procedure listed below is for the LH side.
87510P
1.INSTALL SEAT CUSHION HEATER ASSEMBLY
Set the seat cushion heater with the name stamp side facing the seat cushion cover.
Install the seat cushion heater with new 31 tack pins.
Do not bend or fold the seat cushion heater assembly.
71075S
2.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER
3.INSTALL SEAT CUSHION COVER WITH PAD
4.INSTALL REAR NO. 1 SEAT CUSHION ASSEMBLY RH
71691H
5.INSTALL REAR SEAT CUSHION HINGE COVER NO. 2
71692H
6.INSTALL REAR SEAT CUSHION HINGE COVER NO. 3
72735
7.INSTALL REAR SEAT RECLINING RELEASE LEVER
72572B
8.INSTALL RECLINING ADJUSTER KNOB CAP RH
9.INSTALL REAR NO. 1 SEAT ASSEMBLY RH
Install the rear No. 1 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY>INSTALLATION).