88625
1.INSTALL EVAPORATOR TEMPERATURE SENSOR
If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted.
Insert the sensor to a location that is 1 fin to the right or left of its previous location.
| Area | Standard Dimension |
|---|---|
| a | 48 mm (1.89 in.) |
| b | 9 mm (0.354 in.) |
| c | 34.3 mm (1.35 in.) |
| d | 47.7 mm (1.88 in.) |
| e | 50 mm (1.97 in.) |
88501
2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Install the evaporator to the blower case.
87050
3.INSTALL AIR CONDITIONING RADIATOR ASSEMBLY
Attach the 3 claws and install the air conditioning radiator.
Install the 6 screws.
Attach the 3 claws and install the heater clamp.
Install a new packing, as shown in the illustration.
88650N
4.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
87201B
5.INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY
55990B
6.INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY
7.INSTALL FRONT AIR CONDITIONING UNIT
Install the front air conditioning unit (See page Vehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT>INSTALLATION).